FS: PC10 Dual Monitor Board - See Details

SpiffWilkie

New member
Joined
Mar 28, 2004
Messages
3,507
Reaction score
123
Location
Memphis, Tennessee
Rating - 100%
8   0   0
I have a PC10 dual monitor board that I am selling. The board is semi-working. When the game is powered on initially, the lower monitor looks fine, but when the screen changes to a new game, it looks like the sync is off (please see picture). If I disconnect the monitor harness and then re-attach it, the picture comes back until the game is switched again.
This issue is isolated to the bottom monitor output (I have switched monitors and verified that it's a board issue, not a monitor issue).
This appears to be heat related as the game works normally for a few minutes before it goes wonky. I do not have the time nor the experience to troubleshoot the board.

If you're interested, please make an offer.
Thanks,
Steve

The board will not come with any games, although I will be listing some a little later.
PC10%20010r.jpg

attachment.php
 
I had to adjust my horizontal frequency on my monitor to correct my issue.
It was just slightly out of adjustment.
Straightened right up after.

Have you tried that on yours?
 
I had to adjust my horizontal frequency on my monitor to correct my issue.
It was just slightly out of adjustment.
Straightened right up after.

Have you tried that on yours?

I have. It also does the same thing on either monitor in the cab if I switch the inputs around.
 
Back
Top Bottom