FS: Parts from Sanyo EZ20

sk8ersublime

Well-known member
Joined
Mar 7, 2010
Messages
2,067
Reaction score
62
Location
Frederick, Maryland
Rating - 100%
24   0   0
Hi everyone,

I have a Sanyo EZ laying around that I tried to re-cap and I screwed up some of the traces. When I cut the excess legs off the caps, it pulled the trace away from the board. I was able to do a ghetto trace repair using some wire and scratching off the top layer on the board. It seemed to worked. But then I didnt know about the 100v deal, and I plugged it into my 120 home outlet, the monitor powered on just fine, but then i was told that it was dead now. The monitor would power on the few times i tested it and I did not see any issues. So I tried to make a VGA breakout cable to hook this up to my PC for a mame cabinet, I followed the pinout correctly, but when I plugged in the monitor this time, the fuse next to the AC cable popped. I replaced it, but it just keeps popping. anyway. I guess the main board is dead at this point, but I would imagine everything else may still work. The monitor was from a DK JR cabinet that was running Ikari Warriors so there is a little burn in from DK JR. Anyone interested in anything from this monitor? I am posting pictures of everything from my phone in the next post.

Inverter board - SOLD
Sound Board - SOLD
 
Last edited:
Pics attached.
 

Attachments

  • ImageUploadedByTapatalk1301859463.638758.jpg
    ImageUploadedByTapatalk1301859463.638758.jpg
    96.6 KB · Views: 27
  • ImageUploadedByTapatalk1301859590.097337.jpg
    ImageUploadedByTapatalk1301859590.097337.jpg
    98.8 KB · Views: 26
  • ImageUploadedByTapatalk1301859837.442931.jpg
    ImageUploadedByTapatalk1301859837.442931.jpg
    94.3 KB · Views: 21
  • ImageUploadedByTapatalk1301859926.559218.jpg
    ImageUploadedByTapatalk1301859926.559218.jpg
    50.6 KB · Views: 26
I'll take the horizontal width coil.


Hi everyone,

I have a Sanyo EZ laying around that I tried to re-cap and I screwed up some of the traces. When I cut the excess legs off the caps, it pulled the trace away from the board. I was able to do a ghetto trace repair using some wire and scratching off the top layer on the board. It seemed to worked. But then I didnt know about the 100v deal, and I plugged it into my 120 home outlet, the monitor powered on just fine, but then i was told that it was dead now. The monitor would power on the few times i tested it and I did not see any issues. So I tried to make a VGA breakout cable to hook this up to my PC for a mame cabinet, I followed the pinout correctly, but when I plugged in the monitor this time, the fuse next to the AC cable popped. I replaced it, but it just keeps popping. anyway. I guess the main board is dead at this point, but I would imagine everything else may still work. The monitor was from a DK JR cabinet that was running Ikari Warriors so there is a little burn in from DK JR. Anyone interested in anything from this monitor? I am posting pictures of everything from my phone in the next post.
 
Here's a picture of it. It's on the edge of the chasis board. You just have to desolder it. It should have 4 legs. It's next to that large white rectangle resistor.

How much do you want for the whole chasis?




Where is that? and what do I have to do to remove it? lol sorry.
 

Attachments

  • wc1.jpeg
    wc1.jpeg
    12.2 KB · Views: 3
Here's a picture of it. It's on the edge of the chasis board. You just have to desolder it. It should have 4 legs. It's next to that large white rectangle resistor.

How much do you want for the whole chasis?

I can remove that for you if you would like. I just sold the inverter board, pending payment.

The Chassis is including the pot board, neck board and flyback? idk....~$60 + shipping? Im open to offers, as im not using this monitor obviously. ive seen them run on here for around that. I have someone who would like a H pot, so let me know if you want the whole chassis and Ill just leave everything connected and send it to who ever wants it.
 
Last edited:
Back
Top Bottom