FS: Partially working Pole Position PCB

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,929
Reaction score
9,392
Location
Avon, Minnesota
Rating - 100%
114   0   0
This is my extra board and it recently developed a reset issue. It has worked for 2+years, and I can still get it to boot up, but every now and then it resets. I have tried nothing to get it working. I haven't reseated anything, cleaned anything, nothing. It is complete, was working perfectly, now randomly resets. The board was powered thru the test points, so there is no edge connector burning. With a little messing around, this could be working perfectly in no time. Comes with the coupling connector and NVRAM installed for High Scores. I no longer need it, or I'd be sending it to Millikan for repair and bulletproofing.


$75 shipped.
 
This is my extra board and it recently developed a reset issue. It has worked for 2+years, and I can still get it to boot up, but every now and then it resets. I have tried nothing to get it working. I haven't reseated anything, cleaned anything, nothing. It is complete, was working perfectly, now randomly resets. The board was powered thru the test points, so there is no edge connector burning. With a little messing around, this could be working perfectly in no time. Comes with the coupling connector and NVRAM installed for High Scores. I no longer need it, or I'd be sending it to Millikan for repair and bulletproofing.


$75 shipped.

Damn it... I KNEW I shouldn't've stopped by Home Depot last night... $30 in fuses and now I don't have enough. Crap...

Oh, bump.
 
This is sold. Received payment, shipping in the next 2 days. Gotta find a long enough box. Thanks for the interest.
 
Back
Top Bottom