FS:Part out, or not... Pac Man Cabaret ?

litterbox99

New member

Donor 2011
Joined
May 17, 2010
Messages
20
Reaction score
17
Location
Iowa
Rating - 0%
0   0   0
I'm thinking about parting out my Pac Man Cabaret,
unless someone would want to buy it whole.

Location: Mason City Iowa.

http://home.mchsi.com/~litterbox99/temp/f.jpg


I would sell;

CP

Has new micro switch buttons & micro switch
joy stick.

http://home.mchsi.com/~litterbox99/temp/cp2.jpg
http://home.mchsi.com/~litterbox99/temp/cp.jpg

Marquee

http://home.mchsi.com/~litterbox99/temp/m.jpg

Glass

Has lifting and bubbling at the bottom and instructions
area.
<See other pic's>

PCB with *complete* wiring harness & switching power supply.

http://home.mchsi.com/~litterbox99/temp/p.jpg
http://home.mchsi.com/~litterbox99/temp/pcb.jpg

The PCB has been strapped for a switching power supply.
You must be familiar with this if you were to put it in a
regular Pac Man without the harness.

The SnycBus and Vram boards have been replaced with
custom chip/PCB.

Has Clay Cowgill's 24 in one Multi Pac installed.

A CGA to VGA converter to allow use of a VGA monitor
instead of a picture tube chassis. Right now it's set up
with a Dell 15" Wide Screen LCD monitor with a home
made mount.



This game has worked great for years, but now, none of the
characters show on the maze, otherwise plays fine.

http://home.mchsi.com/~litterbox99/temp/no.jpg

I don't want to debug it as I have Pac Man on one of
these 68 in 1 boards. I need the room & the cash.

What are your thoughts ?
 
Wish you were closer... (not that you're too far away but I would get the evil eye from my wife if I said I was driving to Iowa after driving to the Cities last weekend)

:)
 
Sell it to me I'm in Rochester, MN are nott to far from you at all. Are you interested in any trades??


I'm thinking about parting out my Pac Man Cabaret,
unless someone would want to buy it whole.

Location: Mason City Iowa.

http://home.mchsi.com/~litterbox99/temp/f.jpg


I would sell;

CP

Has new micro switch buttons & micro switch
joy stick.

http://home.mchsi.com/~litterbox99/temp/cp2.jpg
http://home.mchsi.com/~litterbox99/temp/cp.jpg

Marquee

http://home.mchsi.com/~litterbox99/temp/m.jpg

Glass

Has lifting and bubbling at the bottom and instructions
area.
<See other pic's>

PCB with *complete* wiring harness & switching power supply.

http://home.mchsi.com/~litterbox99/temp/p.jpg
http://home.mchsi.com/~litterbox99/temp/pcb.jpg

The PCB has been strapped for a switching power supply.
You must be familiar with this if you were to put it in a
regular Pac Man without the harness.

The SnycBus and Vram boards have been replaced with
custom chip/PCB.

Has Clay Cowgill's 24 in one Multi Pac installed.

A CGA to VGA converter to allow use of a VGA monitor
instead of a picture tube chassis. Right now it's set up
with a Dell 15" Wide Screen LCD monitor with a home
made mount.



This game has worked great for years, but now, none of the
characters show on the maze, otherwise plays fine.

http://home.mchsi.com/~litterbox99/temp/no.jpg

I don't want to debug it as I have Pac Man on one of
these 68 in 1 boards. I need the room & the cash.

What are your thoughts ?
 
I've been trying to find one of these locally for years now -- no luck. Again, you're not local! Don't part it out - what do you want for it?
 
I was thinking $600 and go from there...

For those that are close, I also have an Asteroids Cocktail $450,
Star Wars w/Clay's ESB $900 and a Sega XY Multi Game $650.
 
Last edited:
If someone picks this game-up and needs the top marquee bar (looks to be missing on the pics), feel free to contact me since I believe I have a spare.

Scott C.
 
Back
Top Bottom