FS or FT: Initial D3 sitdown drivers

drewster98

New member
Joined
Dec 23, 2001
Messages
1,857
Reaction score
1
Location
Michigan
Rating - 0%
0   0   0
FS or FT: Initial D3 sitdown drivers in MI

I'm looking to unload these massive driving games if the price is right. You won't find a nicer pair of games condition-wise. Everything works 100%. The game is super clean. Will come with about 100 new cards. One monitor is brand new and the other has minimal burn. Also includes toppers. I'll take pics later and post them. The games come apart in 3 pieces and can easily be transported with a pickup truck. Might have to make 2 trips though. I'm looking to get $1750 for KLOV purchasers. I'm also willing to trade for either a STTNG pin or a Theatre of Magic. I will not ship. You must be able to pick up. Also willing to listen to offers.
 
Last edited:
Are you asking if they'll travel through normal doorways? These games are in my basement and made it through 2 different sized doorways. I also did it by myself. Basically the monitor area comes off and easily fits through a normal doorway. The seats come off completely. And the remaining part is the bottom sled which shouldn't be an issue either.
 
I believe both are Sanwa 29". I replaced one recently with a brand new monitor though. I'd have to check to see if its still a Sanwa. I'll get back to you on this.
 
I have seen these things in person and they are beautiful. My kids loved playing them while I was wasting time bs-ing. Bump for a good guy and a great machine!
 
Are you asking if they'll travel through normal doorways? These games are in my basement and made it through 2 different sized doorways. I also did it by myself. Basically the monitor area comes off and easily fits through a normal doorway. The seats come off completely. And the remaining part is the bottom sled which shouldn't be an issue either.

My problem is that it has to go through one doorway, then immediately through another (with no room to spin it)
 
My problem is that it has to go through one doorway, then immediately through another (with no room to spin it)

The base and the chair are obviously not the issue. It would be the monitor part. I just measured the top part of the machine that houses the monitor and its roughly 29x32x36.
 
Also, a few people are asking me what sort of pickup truck they would need to haul this. To be honest, you're better off renting a Uhaul with a hydraulic lift and taking both machines back in one piece. That way you can take it apart yourself and see how it has to be put back together. These games are HEAVY. Roughly 1500lb for the pair.
 
Just another tidbit of info, this game requires 10 A to run. Each unit has its own cooling system. You will most likely need to put it on its own circuit.
 
Also, a few people are asking me what sort of pickup truck they would need to haul this. To be honest, you're better off renting a Uhaul with a hydraulic lift and taking both machines back in one piece. That way you can take it apart yourself and see how it has to be put back together. These games are HEAVY. Roughly 1500lb for the pair.

A pair will fit in the back of an 01 1/2 chevy w short wide bed :)

I wouldn't do it without a lift gate. Those suckers a HEAVY!!
 
I only wish i live near you and not here in Italy.
Surely i've taken your wonderful twin.
Don't seems to be an used machine....
Beautiful.
 
I bought a pair of Dayton 2s & those suckers were a pain to get in a room...But after that its the greatest purchase ever, if you love ID3 pick this up!

I would recommend having a couple of friends to do this
 
Back
Top Bottom