fs: NORCAL 2 pole positions

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,145
Reaction score
2,593
Location
Eureka, California
Rating - 100%
383   0   0
Both cabs are in decent to good shape. Pics available if anyone local wants to see them.


Here's the story.

I got both machines, one was complete and intact, the other complete but with boards removed.
Monitor did not need a cap kit, and had nice color.
Anyway, I messed around and cleaned up 1 set of boards, and had it working. For 1 week or so. I played maybe 50-100 games.
In the meantime there was a monitor problem (loose wire most likely) where the red would disappear if you whacked the side of the cabinet or even spun the steering wheel fast. It would go in and come out intermittently.

Anyway, I went to the wire harness and wiggled the wires very gently, and now I just get a red screen.

I am not going to drop the "probably an easy fix" line. :O)
But it was working flawlessly. dammit
Anyway, the 2nd game has a PP2 bezel and marquee. I have both arII boards and main pcb's. This set of pcb's comes up with graphics issues and wasn't coining up.

$175 for the pair.
 
Last edited:
how nice is the cab on the one without the boards? Mine has some water damage so it's possible I might be looking to upgrade.

There is no water damage to either cab if I remember correctly. I am not saying it's perfect, but it's the better of the 2 cabs, that's for sure. The one I had working is the worse of the 2.

What doyou think if I get a new wiring harness from bob roberts? People always say it's the wiring harness don't they? Or am I making that up?
 
wiring is an issue with these. Although they also tend to have main board issues as well as power board issues. If your game was working before then stopped I would first reseat all the connectors to the board. If that doesn't work try it again.
 
wiring is an issue with these. Although they also tend to have main board issues as well as power board issues. If your game was working before then stopped I would first reseat all the connectors to the board. If that doesn't work try it again.

Ok, hell with it them. I kind of want a PP.
Dan has dibs on my extra cab, and I am going to try to fix it, unless someone pm's me.
 
Back
Top Bottom