FS Multi Vector Control Panels!

[Takeman]

Payment for 2 panels (Punched & Blank) sent - 21 panels now committed to - are we good to go?

Close, There are only 19 panels paid for. 2 people on the list have not paid yet.

Down side of starting before the presale deadline is I have to give a quantity. Some people dont have the funds or wait to the last minute. This will be first come first serve once I give a total. After I get #20 paid, I will start the run and it will probably by 30 panels. 26 punched & 4 blanks, unless there is a mad rush......

 

[Takeman]

I thought I saw 25 somewhere from Takeman. Still shouldn't be a problem. We had interest in the 30s.

Nope, its 20 prepaid....but we are not quite there....one more needed to get it started.

 

[bheineck]

???? Here (25) Maybe I misunderstood.

Obviously I dont mind adding people to the list if they intend to commit (pay) by the deadline. I am only going to run what is paid for, with a minimum of 25 (combined blank & punched panels) Since this is a specialty panel, there will likely be no extras. If you dont make the deadline, your order will be cancelled and I'll assume you are no longer interested.

Thanks to all of you have supported this project thus far...

3 more (as of 05/10) paid and I'll start the run...

 

[bheineck]

Where the other people on the interest thread PM'd or emailed about this in case they hadn't subscribed to the thread? If not I could do it. I don't mind waiting until the 23rd for the run to start so nobody misses out. Specialty panel = likely to not be run again.

Close, There are only 19 panels paid for. 2 people on the list have not paid yet.

Down side of starting before the presale deadline is I have to give a quantity. Some people dont have the funds or wait to the last minute. This will be first come first serve once I give a total. After I get #20 paid, I will start the run and it will probably by 30 panels. 26 punched & 4 blanks, unless there is a mad rush......

 

[Takeman]

???? Here (25) Maybe I misunderstood.

Thats the minimum run set by the metal shop. Meaning thats the least that will be made, 25

"I'd like to get 20 presold to make this work right. From the time I say go, expect 3-4 weeks. I am only going to run what I have sold, so there will likely be no extras."

Is where I speak of the minimum I need presold to make the run.

 

[Takeman]

Where the other people on the interest thread PM'd or emailed about this in case they hadn't subscribed to the thread? If not I could do it. I don't mind waiting until the 23rd for the run to start so nobody misses out. Specialty panel = likely to not be run again.

I PM'd everyone on the list you made on the interest thread the day I put up the FS thread.

UPDATE:
I sent Shilmover (Barry) the CAD drawing of the hole/panel layout so he can fine tune the CPO.

 

[bheineck]

Got it. I was cornfused!

Thats the minimum run set by the metal shop. Meaning thats the least that will be made, 25

"I'd like to get 20 presold to make this work right. From the time I say go, expect 3-4 weeks. I am only going to run what I have sold, so there will likely be no extras."

Is where I speak of the minimum I need presold to make the run.

 

[shilmover]

I thought I saw 25 somewhere from Takeman. Still shouldn't be a problem. We had interest in the 30s.

In the original thread above, its 20.

 

[djw90]

I'd like to get 20 presold to make this work right. From the time I say go, expect 3-4 weeks. I am only going to run what I have sold, so there will likely be no extras. I will update on a regular basis.



Paid List:

Mailce95 - 1 punched
Alexred - 1 punched
James_in_MD - 1 punched
CSbartz - 1 punched
Scon_fu - 1 punched
Djw90 - 1 punched
Dezbaz - 1 punched
Bheineck - 2 punched / 2 blank
Cnlmoore - 1 punched
Komodo - 1 punched - will pay by 05/23
Retroactive - 1 punched - will pay by 05/23
Veeb0rg - blank
DanP - 1 punched
SRW - 1 punched
Wolfeel - 1 punched
Bryan95502 - 1 punched
Eclipseeye - 1 punched / 1 blank

---------
17 - punched / 4 - blank

---------
21

I thought I saw 25 somewhere from Takeman. Still shouldn't be a problem. We had interest in the 30s.

I was just going off the information in the original post. Didnt see any other numbers? But im sure there will be at least 25 sold. If anyone is even thinking about a ZVG project it would not be wise to pass up this chance

 

[Takeman]

I have an Oscar Vortex spinner and a pair of compact topfire sticks. Will these work with the punched panel?

Spinner studs on the punched panel are:

4.500" Mount holes center to center
2.250" mount holes center to spinner center shaft.


This is confirmed to work on an Oscar & and an original Tempest Spinner.

 

[GackAttack]

Payment sent !

+1 MV punched panel....

Thanks!

-Kris

 

[Takeman]

+1 MV punched panel....

Thanks!

-Kris

Ok, now I have my 20 prepaid. Theres almost 2 weeks before the deadline & this will likely sell out before the deadline....

 

[bheineck]

I forgot about Shilmover's time constraint. I guess those who snooze will lose.

Ok, now I have my 20 prepaid. Theres almost 2 weeks before the deadline & this will likely sell out before the deadline....

 

[shilmover]

I forgot about Shilmover's time constraint. I guess those who snooze will lose.

And those at the NW Pinball and Gameroom show in June will get to play it.

 

[djw90]

And those at the NW Pinball and Gameroom show in June will get to play it.

Can wait to see it and discuss it with you at the show. Will you be there all 3 days?

 

[shilmover]

Can wait to see it and discuss it with you at the show. Will you be there all 3 days?

Sunday for sure. Saturday is probable. Friday is out.

 

[MajorHavoc]

Order placed.

 

[retroACTIVE]

Payment sent for punched panel...
Thanks Troy!

 

[Silverunicorn]

Payment sent for 1 punched panel!

Thank you!

Chris

 

[Takeman]

List updated......