FS Multi Vector Control Panels - Run #2

Takeman

Well-known member
Joined
Nov 7, 2005
Messages
6,066
Reaction score
1,194
Location
Illinois
Rating - 100%
231   0   0
Below is the original verbiage from the original presale. Everything is the same, panel cost, shipping ect. I'll give this 3 weeks for the presale. (Wed July 13th 6pm CST)

If you missed out, this is your chance to get back in. Shilmover will be announcing the presale for the CPO's soon and he is only running what is sold, so If you want this panel and his overlay, dont snooze.

This totally sold out last run, I am kinda expecting the same this time....I am only going to run the minimum required by my metal shop (25) or whatever is sold by on/by July 13th. Dont expect there to be extra panels.

-------------------------------------------
I have been asked to to make a 2nd run of control panels for the Multi Vector (MV) control panel overlay produced by Shilmover. The panel will be laid out to work with his overlay and mount in a Space Duel Cabinet.

See pics and the thread here. http://forums.arcade-museum.com/showthread.php?t=178103

My panels will be offered 2 ways. 1: punched out as you see his panel is, with the addition of stud mounting for the sticks and spinner, hinge, lock down tabs, powder coated smooth black & die punched holes. There is one tiny catch. Do to the forward location of the spinner, I had to place 2 additional mounting holes in the hinge (not seen when installed) on either side of the factory center hole. The end holes are in the factory locations. You would have to drill 2 holes in your cab to fasten the center of the panel to the cab. I dont think most people would care, but I wanted you to make an informed purchase.

Panel 2: Would be considered a "blank", meaning no holes punched with the exception of the hinge, which is the same on both panels. Blank panel has lockdown tabs, hinge & smooth black powder coat.

Now for the details. Due to the great cost involved, I will have to do a presale order on this. Panels are prices as follows:

#1 Punched MV panel is $80 plus $20 shipping to USA 48 which includes a custom box

#2 Blank panel is $70 plus $20 shipping to USA 48 which includes a custom box

Paypal payments to [email protected] Be sure you put your KLOV name in the comments and what payment is for. Dont forget your contact info :)

1. Project (ie MV Panel)
2. KlOV Alias
3. Name & Shipping address
4. Email address

I'd like to get 15 presold to make this work right. From the time I say go, expect 3-4 weeks. I am only going to run what I have sold, so there will likely be no extras. I will update on a regular basis.

I'll give the pre-order until July 13th @6pm Central time. If the minimum is met before hand, I will start the run early, but have to put a cap on the quantity. After the 13th, the panel will go up if* there are any left over from my minimum run of 25.

*Overlay is not included*

If for some reason the minimum is not met, I'll refund all monies.

I'll keep a master list & status here for you all to see.

Any questions? Shoot me a PM.

Paid List:
__________
Reserved x3 punched
Hmoonarcade x1 punched -SHIPPED
Bheineck x1 punched -SHIPPED
Robran68 x2 punched-SHIPPED
MLenardon x2 punched-SHIPPED
Gregbl x4 punched-SHIPPED
Jody x1 punched -SHIPPED
Ojosdeldiablo - 1 punched -SHIPPED
ChadsArcade - 1 punched *ship to Shilmover-SHIPPED
Bhamarcade - punched - Check received-SHIPPED
Davek -1 punched-SHIPPED
Mnrocketry -1 punched-SHIPPED
Boo32 - 1 punched-SHIPPED
pinfamous - 1 punched-SHIPPED
Thairoller - 1 punched - SHIPPED

-----------------------
22 punched
 
Last edited:
I might pull the trigger on this. I have a question about the joystick mounts. In the pix of the overlay I didn't see any carriage bolts so is it safe to assume there are pressed in studs like on MW panels?? Pix of the finished product top and bottom would be great!
 
I might pull the trigger on this. I have a question about the joystick mounts. In the pix of the overlay I didn't see any carriage bolts so is it safe to assume there are pressed in studs like on MW panels?? Pix of the finished product top and bottom would be great!

Yes, they are studs. I'll put some pics up tonight it in the am at latest.
 
I might pull the trigger on this. I have a question about the joystick mounts. In the pix of the overlay I didn't see any carriage bolts so is it safe to assume there are pressed in studs like on MW panels?? Pix of the finished product top and bottom would be great!

Here are some quick photos of the one I got. Let me tell you , I personally feel this is one of the most quality reproduction items I have EVER purchased. This is a NICE CP. Well worth the asking price. I don't think anyone is getting rich for what he is selling these for.

5869354396_a75fb4e923.jpg


5868796451_c519908b21.jpg


5869354626_d85b0c31a5.jpg



Hope this helps :)

Chris
 
Here are some quick photos of the one I got. Let me tell you , I personally feel this is one of the most quality reproduction items I have EVER purchased. This is a NICE CP. Well worth the asking price. I don't think anyone is getting rich for what he is selling these for.

5869354396_a75fb4e923.jpg


5868796451_c519908b21.jpg


5869354626_d85b0c31a5.jpg



Hope this helps :)

Chris

Wow!! that's one nice piece of metal....I agree as that is worth every penny! Thanx for posting these, hope the pix help getting some more orders.
 
For those of us who are out of the loop but think this could make a neat project, is this for any specific multigame setup? Like ZVG or AAE? I tried to do a little research, but wasn't finding any info fast and didn't want to flip through the last thread.

Mainly wondering if there is a board or emulator still in production that can utilize a real vector monitor (besides ZVG which I guess is no longer made?).
 
For those of us who are out of the loop but think this could make a neat project, is this for any specific multigame setup? Like ZVG or AAE? I tried to do a little research, but wasn't finding any info fast and didn't want to flip through the last thread.

Mainly wondering if there is a board or emulator still in production that can utilize a real vector monitor (besides ZVG which I guess is no longer made?).

This CP is intended to have a multivector MAME setup run through a ZVG to a vector monitor in a Space Duel cab.
 
Back
Top Bottom