FS: MKII, Sinbad pin, Robotron CPU, Double Dragon 3

Grbgemen

Active member
Joined
Mar 12, 2008
Messages
1,167
Reaction score
8
Location
Lincoln, Nebraska
Rating - 100%
33   0   0
FS: MKII, Sinbad pin, Robotron CPU, Double Dragon 3

Need to sell some stuff to fund other things.

1. Mortal Kombat II - $425 - Works. Was empty and painted black when i got it. Stripped the sides to reveal original artwork in nice shape. Has NOS marquee and plexi overlay. Replacement monitor chassis from 8liners. Has beautiful picture with no burn. New joysticks/buttons, harness, power supply, etc... Its a solid cabinet with no major damage. Looks nice, sounds nice, and plays nice.

2. Gottlieb Sinbad pinball - On Hold - Works. Very nice condtion. Backglass is perfect. Playfield is very nice along with the cabinet. Had to re-pin a few connectors to get it working. Needs external battery holder.

3. Robotron CPU - $45 shipped. Was having issues with my Robotron and thought it was a CPU problem. Bought a tested CPU from Saltbreez on here. Ended up being in the widget board. So technically this board worked the whole time. However i no longer have the Robotron to test the board. Will throw in untested Robotron sound board if i can find it. here is a thread when i was having problems:
http://forums.arcade-museum.com/showthread.php?t=101046&highlight=robotron

4. Double Dragon 3 pcb - SOLD!!! - Worked when last tested but can test again before shipping.

5. Mortal Kombat pcb - $35 shipped. PCB works. Sound board is untested as i am missing the power cable. Includes ribbon cable.
 

Attachments

  • mk1.JPG
    mk1.JPG
    74 KB · Views: 53
  • mk2.JPG
    mk2.JPG
    91.5 KB · Views: 55
  • mk3.JPG
    mk3.JPG
    55.2 KB · Views: 45
  • mk4.JPG
    mk4.JPG
    77.5 KB · Views: 64
Last edited:
Nice prices You did a very good job stripping the paint off the mk2 by the way looks great :)

Thanks. I used that 3M safest stripper. There is still some black paint left. Mainly at the bottom of each side. It was getting to the point where i was getting very little off each time applied a new coat. That and if the stripper sat too long, it started to bubble. I decided to quit rather than ruin the artwork.
 
Thanks. I used that 3M safest stripper. There is still some black paint left. Mainly at the bottom of each side. It was getting to the point where i was getting very little off each time applied a new coat. That and if the stripper sat too long, it started to bubble. I decided to quit rather than ruin the artwork.

What idiot covered that great artwork with black paint? Nice job restoring it. Damn, it looks as nice as mine and I didn't have to remove any paint.

I wonder how long that paint was on there. Maybe it kept the artwork safe for years.

One thing I noticed though, besides the joysticks being black instead of red, the dustwashers are on top of the control panel. They should go underneath. You have to take the whole thing apart though...I just replaced all the buttons and joysticks on mine. Guess whoever buys it can mess with it. Great price!
 
Last edited:
Back
Top Bottom