FS: MK1/2/umk3 PCBs tested working

Broodwich

Well-known member

Donor 6 years: 2012-2013, 2015, 2020, 2023-2024
Joined
Feb 20, 2011
Messages
9,846
Reaction score
420
Location
Albany, New York
Rating - 100%
140   0   0
-Ultimate Mortal Kombat 3 -UMK3- Rev 1.0, Tested Fully Working $150 (FREE KIT MANUAL WITH PURCHASE!!!!!) (needs kick harness) SOLD!

-(2)Mortal Kombat 2 - MK2- Rev 3.1, Tested Working, No sound (needs sound board) $80 each (needs kick harness and sound board harness along with sound board)

-Mortal Kombat - MK1- Rev 3.0 Tested Working, With Sound board. $60 (needs sound board power wiring,volume pot, and kick harness)

-NBA Jam TE Sound Board - Tested working $25 (board only no cables) (This will also work on MK1 if you swap in the MK1 roms)

No harnesses included unfortunately, but all harnesses can be had from bob roberts for $7.50 each. MK1 and 2 do have ribbon cables tho (surprise surprise).

I'm open to trades for the following:

Rampage World Tour PCB
Total Carnage PCB set
MK3 (non ultimate) PCB
(2-4) Red Wico 8way sticks
KI1-KI2 Conversion Daughter Board
KI1 Dedicated Control Panel
Tekken Tag PCB
 

Attachments

  • MK1.jpg
    MK1.jpg
    100.9 KB · Views: 12
  • MK2.jpg
    MK2.jpg
    103 KB · Views: 12
  • NBA JAM TE SB.jpg
    NBA JAM TE SB.jpg
    102 KB · Views: 9
  • 100_1338.jpg
    100_1338.jpg
    102.7 KB · Views: 5
Last edited:
Weekend Sale is over :( but if you ask nice i might lower the price a bit :D

Added another MK2 board.

and removed a few things from my want list
 
good to hear! the mk2 minus the sound is a little high even for ebay prices, I can usually get an mk2 board minus the sound for $45-50, i'd say $45 shipped would sell instantly $55 shipped is probably klov face value for those, same with the mk1.
 
Back
Top Bottom