FS: Missile Command/Football 4.5" Trackball Rebuild kits WITH bearings

Status
Not open for further replies.

Daviea

Permanently Banned - See: Ram Controls Forum Secti
Joined
Jul 18, 2006
Messages
958
Reaction score
8
Location
Huntington Beach, California
Rating - 85.4%
82   14   0
FS: Missile Command/Football 4.5" Trackball Rebuild kits WITH bearings

I finally dug out my stash of bearings and decided to make these kits available here on KLOV at a discounted price. As you know, I've been selling the Trackball/EncoderShaft sets for $40 shipped for KLOV members for some time now. I'm doing the same deal, but I'm adding FIVE oil lubed bearings to the kit.... for the same price of $40 shipped anywhere in the world.

Here's what you get for $40:

4.50TrackballRebuildKit01.jpg


- One OEM (made by original manufacturer) 4.5" Black Trackball.
- Two stainless steel encoder shafts.
- Five oil lubed bearings.

$40 shipped anywhere in the world. Paypal email is [email protected]

If you only need bearings and shafts, you can have a set for $20 shipped anywhere in the world.

Additionally, if you only need the bearings, you can have a set of five for $10 shipped anywhere in the world.

Again, my paypal email is [email protected]

Have a great Thanksgiving, everyone!!

Dave

EDIT: Please note the paypal email address change above. [email protected]
 
Last edited:
sending payment for two sets of bearings and shafts.
 
Wow, that's a great deal, get on it if you've got a Missile Command! I'd be all over this if I hadn't just recently rebuilt mine.
 
Do you have any kits for an Atari 3" Midi Trak-Ball assembly? My Liberator needs a rebuild.
 
I do have roller kits and roller/bearing kits for the 3" trak-ball units. Unfortunately, I do not have any 3" balls (lol) available.

I also have 2.25" roller kits and 2.25" roller/bearing kits.

Roller kits are $10ea shipped and roller/bearing kits are $20ea shipped.


Do you have any kits for an Atari 3" Midi Trak-Ball assembly? My Liberator needs a rebuild.
 
I finally dug out my stash of bearings and decided to make these kits available here on KLOV at a discounted price. As you know, I've been selling the Trackball/EncoderShaft sets for $40 shipped for KLOV members for some time now. I'm doing the same deal, but I'm adding FIVE oil lubed bearings to the kit.... for the same price of $40 shipped anywhere in the world.

Here's what you get for $40:

4.50TrackballRebuildKit01.jpg


- One OEM (made by original manufacturer) 4.5" Black Trackball.
- Two stainless steel encoder shafts.
- Five oil lubed bearings.

$40 shipped anywhere in the world. Paypal email is [email protected]

If you only need bearings and shafts, you can have a set for $20 shipped anywhere in the world.

Additionally, if you only need the bearings, you can have a set of five for $10 shipped anywhere in the world.

Again, my paypal email is [email protected]

Have a great Thanksgiving, everyone!!

Dave

Hi Dave,

This deal still good?
Thanks,
Mike
 
The deal is still good. HOWEVER, I'm terribly backlogged at the moment, so orders are shipping a little slow at the moment. I just wanted to be upfront about that right now because I'm spending all of my RAM Controls time slapping together yoke controllers. Though, I do have a couple of trackball kits already packaged up, so I could probably get them out same day or next day.

Dave
 
Status
Not open for further replies.
Back
Top Bottom