FS: K7000a-25 chassis and K7000a-19

komodo

Well-known member

Donor 2019, 2021
Joined
Apr 25, 2007
Messages
5,011
Reaction score
101
Location
Flower Mound, Texas
Rating - 100%
141   0   0
I have I think 4 or maybe 5 of these chassis. These are the Zenith version of the 25" K7000 monitor chassis. These are untested. The flyback for these is unavailable but I have only found a couple in my years of rebuilding them that don't work. I am asking $10 each for them + shipping. These can be used for parts if you like to rebuild the regular K7000 chassis but there really aren't that many parts that you could rob to make it worth while. These are pin compatible with the standard K7000-25 chassis and they are a cheap way to get a replacement chassis for your tube. About $10 shipping for one and $15 for two. I can do all of them for about $20.

I also have 3 or 4 of the K7000a-19 chassis for sale. One has a weak flyback and should be replaced. It has been capped and does work but really needs to have a new one swapped in. Hence the need to buy all of these chassis to have spares. I will sell all 3 of them for $25 + shipping.

All chassis are clean and rebuildable. I am getting out of the raster side of things hence the blowout. Free pickup if in the DFW area. It is actaully preferred. If you don't like my pricing, make an offer.
 
the 19 inch versions are pending. That just leaves the 25" versions. I would bet money that at least one of these will work on installation. (It will probably require a cap kit) but heck of a cheap way to geta working chassis.
 
Back
Top Bottom