FS in Chicagoland: Tempest, Centipede cabaret, Track & Field multi, Breakout

Sam Zehr

New member
Joined
Jul 22, 2006
Messages
31
Reaction score
0
Location
Crete, Illinois
Rating - 100%
2   0   0
FS in Chicagoland: Tempest, Centipede cabaret, Track & Field multi, Breakout

Hi guys

Out of space - getting rid of a bunch of arcade stuff

Located in Crete, IL - 30 miles south of downtown Chicago

Not interested in parting out or shipping at this time, thanks

Not been active in the hobby in awhile - don't know current prices, so if these are all off, make me an offer

Email is better for me than PM samzehr NO@SPAM comcast.net

Tempest - $500
http://www.athyriogames.com/games/tempest_2469.JPG
http://www.athyriogames.com/games/tempest_2471.JPG
http://www.athyriogames.com/games/tempest_2474.JPG
http://www.athyriogames.com/games/tempest_2475.JPG
http://www.athyriogames.com/games/tempest_2477.JPG
Bought this from a collector - repro CPO - spinner is quiet
Works great - monitor is nice

Track & Field - $300
http://www.athyriogames.com/games/trackf_2451.JPG
http://www.athyriogames.com/games/trackf_2453.JPG
http://www.athyriogames.com/games/trackf_2454.JPG
http://www.athyriogames.com/games/trackf_2455.JPG
http://www.athyriogames.com/games/trackf_2456.JPG
http://www.athyriogames.com/games/trackf_2458.JPG
http://www.athyriogames.com/games/trackf_2459.JPG
http://www.athyriogames.com/games/trackf_2461.JPG
http://www.athyriogames.com/games/trackf_2465.JPG
http://www.athyriogames.com/games/trackf_2466.JPG
Works fine
Cabinet is natty, and monitor is burned-in - but great extras!
Hypersports board - working, but speech garbles
'88 Games board with JAMMA->Konami adapter
'88 Games works, but no sound - might need separate sound amp?
Extra nonworking T&F board - bought for parts, hopefully speech chip works!
Extra control panel: sandblasted, powdercoated, repro CPO
Repro CPO needs last fold glued down
Uninstalled repro side art
Ready for a repaint, and to make into a Multi-Track!

Centipede cabaret - $400
http://www.athyriogames.com/games/centipede_2479.JPG
http://www.athyriogames.com/games/centipede_2480.JPG
http://www.athyriogames.com/games/centipede_2481.JPG
http://www.athyriogames.com/games/centipede_2482.JPG
http://www.athyriogames.com/games/centipede_2483.JPG
http://www.athyriogames.com/games/centipede_2484.JPG
http://www.athyriogames.com/games/centipede_2485.JPG
http://www.athyriogames.com/games/centipede_2486.JPG
http://www.athyriogames.com/games/centipede_2487.JPG
http://www.athyriogames.com/games/centipede_2488.JPG
http://www.athyriogames.com/games/centipede_2489.JPG
Restored - disassembled, cleaned, sandblasted and powdercoated when possible
Sides sanded and filled, new woodgrain decals applied, new t-molding
New monitor, new CPO, rebuilt trackball
Cold cathode light behind marquee
Only thing missing is the flaps on the coin doors - sandblaster lost them!

Breakout - $300
http://www.athyriogames.com/games/breakout_2443.JPG
http://www.athyriogames.com/games/breakout_2444.JPG
http://www.athyriogames.com/games/breakout_2445.JPG
http://www.athyriogames.com/games/breakout_2446.JPG
http://www.athyriogames.com/games/breakout_2447.JPG
http://www.athyriogames.com/games/breakout_2448.JPG
Restored - disassembled, cleaned, sandblasted and powdercoated when possible
Bezel had a few cigarette burns - I cleaned it up as best I could
Coin switches not bolted in - I was trying to figure out a way to hook the to the rejects

If anyone is making the trip out, I have tons of other stuff that will probably be going
Frogger restored, new monitor
Mappy good shape, extra repro CPO and backglass
Ms. Pac-Man, internally restored, new monitor, cabinet is worn, have stencils
Q*Bert good shape, extra untested boardset, uninstalled 6-in-1, uninstalled repro CPO
Robotron - extra harness w/switches, NOS Red balls, extra partially working boardset
Satan's Hollow - extra MCR power, extra used red stick
Baby Pac-Man - extra playfield, extra boards, extra control panels

Pinball:
Mr & Mrs. Pac-Man - clean MPU, extra playfield
Dolly Parton - playfield worn, clean MPU

Monitors:
13" and 25" nice, 13" tube and frame, 13" tube only
19" working with Pac burn
19" B&W untested

Old oscilloscope, works
Road Riot 4WD - kit with working board and controls
Mr. Do - boards and sideart,
Lots of other boards
Lots of boards

Thanks
Sam
 
Back
Top Bottom