Keroppi
Member
Hi All:
In my quest entitled "sell everything I love dearly to pay for open heart surgery" I have decided to see if there would be any takers on everything pin/vid related I own.
If I am to take this like a man, I want to sell all of them, because it will be as painful to just sell my favs, but I say "up to" because you might not want all of them. You may rather me dispose of a couple of the cabs than store them. However, I will sell individual titles (prices listed)...everything is OBO but please make any offers reasonable. I am open to offers on partial lot as well. I know these aren't fire-sale prices, but I NEED money desperately. As a lot these are only $200 a game and although a few titles are clearly not worth that much, some are clearly worth much more. This is painful to do, but I am desperate.
Many of these are project/untested machines, many have all new parts to make them nice. Some of the vid cabs were destined for mame machines, and I can/will include some good computers and parts and such to do so if you buy the lot.
There are 11 Pins, and 19 Vids/cabs, and piles and piles of parts, extras, etc. I will give a rundown of titles and highlights of conditions.
Feel free to call me with any questions.
Justin
(281) 850-9086
**THIS IS PART TWO OF THE POST, SEE PART ONE FOR REST OF LIST**
Non-Dedicated Cabs That Could be Vids:
Sega Megalo 410 JAMMA Candy Cab($450)
Good physical condition, setup up for dual 6 button layout. Fully functional, but monitor is dim as hell and needs work. I bought (and will include) qty2 40" SVGA VGA/DVI LCD rear-projection videowall cubes that have an 8000hr bulb life to replace the aged CRT unit (and have a spare) to make it a mame machine. The cubes should be a drop in replacement and use the existing mirror/screen.
Nintendo UR Cab($125)
Decent physical condition, needs minor woodwork and paint. Appear to used to be a DK JR, but now JAMMAtized with no PCB and a ghetto marquee/CPO. Converted to a 2 player layout, but buttons and sticks were worn. Has a working arcade monitor that needs a cap kit but don't remember what kind. Will include an unpopulated Unisystem control panel which should fit. Comes with a Popeye bezel. Can be restored to an original Ninty cab relatively easily.
Nintendo DualSystem VS UR Cab($250)
Decent physical condition, needs woodwork on one side edge. Converted to Super High Impact Football, which works, but 1 EZ20 monitor is not running. I have not investigated to see if this is due to poor jerry-rigging from the previous owner (SHI is a single monitor game) or if the monitor has issue. The running EZ20 probably needs a cap kit.
Sega Rally Cockpit($250)
Decent physical condition, was one half of the twin unit but includes the coin box portion with a trashed coin door. Needs a good cleaning. Missing the (29")? monitor and PCBs, and possibly the back door. All other controls/motors/pedals/etc. are present. Was planning on turning this into an xbox multigame racer, Will include the Fanatec Speedster racing wheel (best high end force feedback racing wheel ever made, retailed $150 by itself)
Final Lap Twin Cockpit($300)
Fair physical condition, needs some woodwork at the base by the seats section. Needs a good cleaning. Had been converted to 1000 Mile Rally and still shows as such. Missing the monitors and PCBs. All other (converted) controls/pedals/etc. are present. Was planning on turning this into a dual xbox multigame racer, Will include TWO Fanatec Speedster racing wheels (best high end force feedback racing wheel ever made, retailed $150 each by themselves), 2 brand new HAPP up/down turbo shifters, and the large Player 1-Player 2 Cruisin' marquees.
Mame-Destined Cabs:
Bally Gorf Cabinet
I debated on whether I would convert this back. It's been painted over (mostly stripped off now) and all bezels, plexi, and marquee are decent to good. Got a rough complete original control panel and what's left of the converted one, all that is left of the innards, however, is the rank light pcb. Have and can include everything to make this a nice complete mame machine, including 21" UXGA monitor. Nobody will pay anything worthwhile for whats left of this separately, so it's not listed as such.
Stern Cocktail Table
Wood is in good conditon, glass is scratched and painted nasty, CPs are also nasty but populated. Wiring is intact IIRC but for what game who knows? Like above, was going to make this a mame machine and have everything to complete it as such, but worth very little on it's own.
Sega/Gremlin Cab
Wood is in good conditon,but was already on it's way to becoming a mame cab. already mounted with a UXGA monitor, 2 control panels to work with. Same as above.
29" Ready Bare MDF Cab
Self explanitary, needs Control Panel. Just started. Speakers and wheels mounted.
...and a massive pile of parts. Half a dozen good computers, monitors, tubes, chassis', pcbs, io boards, pedals, joysticks, buttons, encoders, wheels, levelers, marquee lights, trackballs, SDUs, Fuses, connectors, harnesses, plugs, switches, etc. YOu nam it.
...and a BK 470 CRT rejuvenator that I haven't had a chance to resolder, but will work when done.
In my quest entitled "sell everything I love dearly to pay for open heart surgery" I have decided to see if there would be any takers on everything pin/vid related I own.
If I am to take this like a man, I want to sell all of them, because it will be as painful to just sell my favs, but I say "up to" because you might not want all of them. You may rather me dispose of a couple of the cabs than store them. However, I will sell individual titles (prices listed)...everything is OBO but please make any offers reasonable. I am open to offers on partial lot as well. I know these aren't fire-sale prices, but I NEED money desperately. As a lot these are only $200 a game and although a few titles are clearly not worth that much, some are clearly worth much more. This is painful to do, but I am desperate.
Many of these are project/untested machines, many have all new parts to make them nice. Some of the vid cabs were destined for mame machines, and I can/will include some good computers and parts and such to do so if you buy the lot.
There are 11 Pins, and 19 Vids/cabs, and piles and piles of parts, extras, etc. I will give a rundown of titles and highlights of conditions.
Feel free to call me with any questions.
Justin
(281) 850-9086
**THIS IS PART TWO OF THE POST, SEE PART ONE FOR REST OF LIST**
Non-Dedicated Cabs That Could be Vids:
Sega Megalo 410 JAMMA Candy Cab($450)
Good physical condition, setup up for dual 6 button layout. Fully functional, but monitor is dim as hell and needs work. I bought (and will include) qty2 40" SVGA VGA/DVI LCD rear-projection videowall cubes that have an 8000hr bulb life to replace the aged CRT unit (and have a spare) to make it a mame machine. The cubes should be a drop in replacement and use the existing mirror/screen.
Nintendo UR Cab($125)
Decent physical condition, needs minor woodwork and paint. Appear to used to be a DK JR, but now JAMMAtized with no PCB and a ghetto marquee/CPO. Converted to a 2 player layout, but buttons and sticks were worn. Has a working arcade monitor that needs a cap kit but don't remember what kind. Will include an unpopulated Unisystem control panel which should fit. Comes with a Popeye bezel. Can be restored to an original Ninty cab relatively easily.
Nintendo DualSystem VS UR Cab($250)
Decent physical condition, needs woodwork on one side edge. Converted to Super High Impact Football, which works, but 1 EZ20 monitor is not running. I have not investigated to see if this is due to poor jerry-rigging from the previous owner (SHI is a single monitor game) or if the monitor has issue. The running EZ20 probably needs a cap kit.
Sega Rally Cockpit($250)
Decent physical condition, was one half of the twin unit but includes the coin box portion with a trashed coin door. Needs a good cleaning. Missing the (29")? monitor and PCBs, and possibly the back door. All other controls/motors/pedals/etc. are present. Was planning on turning this into an xbox multigame racer, Will include the Fanatec Speedster racing wheel (best high end force feedback racing wheel ever made, retailed $150 by itself)
Final Lap Twin Cockpit($300)
Fair physical condition, needs some woodwork at the base by the seats section. Needs a good cleaning. Had been converted to 1000 Mile Rally and still shows as such. Missing the monitors and PCBs. All other (converted) controls/pedals/etc. are present. Was planning on turning this into a dual xbox multigame racer, Will include TWO Fanatec Speedster racing wheels (best high end force feedback racing wheel ever made, retailed $150 each by themselves), 2 brand new HAPP up/down turbo shifters, and the large Player 1-Player 2 Cruisin' marquees.
Mame-Destined Cabs:
Bally Gorf Cabinet
I debated on whether I would convert this back. It's been painted over (mostly stripped off now) and all bezels, plexi, and marquee are decent to good. Got a rough complete original control panel and what's left of the converted one, all that is left of the innards, however, is the rank light pcb. Have and can include everything to make this a nice complete mame machine, including 21" UXGA monitor. Nobody will pay anything worthwhile for whats left of this separately, so it's not listed as such.
Stern Cocktail Table
Wood is in good conditon, glass is scratched and painted nasty, CPs are also nasty but populated. Wiring is intact IIRC but for what game who knows? Like above, was going to make this a mame machine and have everything to complete it as such, but worth very little on it's own.
Sega/Gremlin Cab
Wood is in good conditon,but was already on it's way to becoming a mame cab. already mounted with a UXGA monitor, 2 control panels to work with. Same as above.
29" Ready Bare MDF Cab
Self explanitary, needs Control Panel. Just started. Speakers and wheels mounted.
...and a massive pile of parts. Half a dozen good computers, monitors, tubes, chassis', pcbs, io boards, pedals, joysticks, buttons, encoders, wheels, levelers, marquee lights, trackballs, SDUs, Fuses, connectors, harnesses, plugs, switches, etc. YOu nam it.
...and a BK 470 CRT rejuvenator that I haven't had a chance to resolder, but will work when done.
