Keroppi
Member
Hi All:
In my quest entitled "sell everything I love dearly to pay for open heart surgery" I have decided to see if there would be any takers on everything pin/vid related I own.
If I am to take this like a man, I want to sell all of them, because it will be as painful to just sell my favs, but I say "up to" because you might not want all of them. You may rather me dispose of a couple of the cabs than store them. However, I will sell individual titles (prices listed)...everything is OBO but please make any offers reasonable. I am open to offers on partial lot as well. I know these aren't fire-sale prices, but I NEED money desperately. As a lot these are only $200 a game and although a few titles are clearly not worth that much, some are clearly worth much more. This is painful to do, but I am desperate.
Many of these are project/untested machines, many have all new parts to make them nice. Some of the vid cabs were destined for mame machines, and I can/will include some good computers and parts and such to do so if you buy the lot.
There are 11 Pins, and 19 Vids/cabs, and piles and piles of parts, extras, etc. I will give a rundown of titles and highlights of conditions.
Feel free to call me with any questions.
Justin
(281) 850-9086
**POST IS TOO LONG, PLEASE SEE PART 2 FOR REST OF LIST**
Pins:
Bally Cybernaut ($1000)
Great condition with minimal wear on some inserts. A 9 all the way around. Freshly rebuilt rectifier, sound board and SDU . MPU is an unmolested acid-free 6802 with remote battery pack. New shooter sleeve, rubbers, ball, NOS ramp tube. Does need new (proper) drop targets.
Williams Hyperball ($700)
Good condition, fresh full rebuild of every board except sound. New plastics, balls, and ball shooter, all noise mods and shooter mod done, custom HS saving rom and custom keychain. Bg is 8/10, is currently disassembled for cab paint touchup and new coin door (nice but not perfect coin door included). Good painted legs. Can reassemble before sale.
Bally Future Spa ($400)
Good condition but fully disassembled for PF restore. MPU is nasty (repaired) but works, fresh rebuild on SDU and rectifier, sound board untested. cab is faded/flaking, good painted legs, BG has 2 small cracks (have not yet triple thicked) PF has minimal paint loss around sunken inserts. most metal parts on top of PF were corroded, have bought about 60% of PF parts brand new (posts, springs, screws, flippers, rubbers, ball, etc.)
GamePlan Attila The Hun($500)
Great condition, rare game (prod. 500) MPU freshly rebuilt. New legs, rubbers, springs, ball. Spare SDU. Spare NOS plastic set. New drop target inserts (originals are worn). BG is 8/10, starting to flake/lift on the edges, needs TT. Cab is 9/10, PF has minimal paint loss around a couple inserts.
Williams Gulfstream($300)
Working EM (my only one) in fair condition for it's age. BG flaking significantly, cab is faded/marked, PF has notable but not terrible paint loss. Decent legs, New rubbers, ball, Score motor was rebuilt a few years ago.
Bally Space Invaders($300)
Complete but untested, assume not working. NOS spinner, new rubbers, custom flipper decals. BG's are pristine, cab is fair, PF has significant midsection paint loss as so many of them do.
Williams Time Warp($250)
Complete but untested, assume not working. Cab is in fair to rough condition, BG art is spiderweb cracked pretty bad. PF is dirty as hell but minimal paint loss (IIRC). Has orig. banana flippers. Spare bumper caps, rectifier board. new rubbers, new PF glass. Includes Leons Sys6 test ROM, since I assume it will need it.
Gottlieb Rock($300)
Complete but untested, assume not working. Cab is in pretty good condition, Translite faded pretty badly, PF is dirty with lifting mylar but no actual damage IIRC, I believe some of the posts and such need tumbling work. Plastics were trashed, but I have a perfect NOS set. New rubbers included. I think the legs were rough.
Bally Baby Pac-Man($400)
I'll call this one a pin. Complete but unsure of working condition. Bought with no MPU, power up would come up with a rolling screen. Vidiot flashes correctly, but rolling is either caused by monitor adjustment or vidiot. Bought a new MPU but haven't installed. PF has minimal paint loss, Good condition bezel bought and haven't even unwrapped. Marquee is good, side art is mostly intact, cab is somewhat rough (swollen bottom)...Control Panel is disassembled, comes with new CPO, spinner decals, t-molding, rubbers, and ball.
Fascination Inc. (ALI) Circa 1933($150)
Complete Coktail Pinball, but non-functional MPU. John Robertson can fix it, but it seems no one else can. PF is nice, cab is pretty good, plastics/apron are busted to hell.
ALI Eros One($250)
Complete Coktail Pinball, but (again) non-functional MPU. Same system and setup as Circa 1933. Everything in overall good shape. For either of these 2 machines (this one if bought separately) I have an additional (untested) MPU and wiring harness that may bring one to life. You can unplug and swap the PFs so I had intended on one good machine that I could switch PF back and forth.
Dedicated Vids:
Sega Star Wars Arcade Racer($1000)
Good condition 50" Deluxe Cockpit model. Minor bumps, scrapes and bruises, moderate screen burn. One side of side art is rough. Needs a little TLC and minor parts (grommets, screws, etc.)
Sega OutRun($400)
Good condition. Recent capkit on the monitor, metal map is mostly intact. CP has very minor damages. Side art has some scratches but is pretty good condtion. Cab is in overall good condition but needs repair on one side of the floor platform. Includes replacement steering wheel (installed one has a chunk gouged out), New uninstalled horn emblem, new floor mat. New (not installed) t-molding, spare shifter.
Atari Star Wars Upright($500)
Fair to good condition; complete but not fully tested. WG monitor powered up and no deflection led lit. PCBs are untested because it had a bad ARII when I bought it; I bought a newly rebuilt one after it went into storage. I am sure it needs a new big blue. Cab is rough around the edges, but side art is in overall good condition (red is faded of course). CP is nice, bezel is nice, paint on yoke is worn and probably needs new springs. Marquee is trashed (glass is shattered) but held together with tape and included.
Namco Cyber Sled($500)
Good condition;both monitors recently rebuilt but need color matching. Cab is in overall good condition, a little rough on the bottom edge of monitor section, IIRC the decals on the seats were a little rough. Missing a few stickers on one of the control panels. Analog joysticks (same as on Star Wars Trilogy) would not calibrate properly, so I bought 8 extra complete joysticks (machine uses 4) and the adjustment pots for the pot amp pcbs in case that was the problem. Never got a chance to finish checking. Marquee has a minor crack and includes new (not installed) t-molding. Spare set of PCBs (both sides) that worked but wouldn't network link. So I bought a whole new (installed) set.
Nintendo Punch Out!!($400)
Complete and mostly functional; Half disassembled for restore. Cab is in decent shape with minimal woodwork needed and paint. Plexi is good but needs buffing. Everything tested well except monitors, 1 was dead and one badly needed a cap kit. I have since aquired 2-3 additional untested EZ20s (included) so I am sure it won't be an issue to get 2 good monitors. Marquee is good, includes new (not installed) CPO, side art, t-molding.
Bally Ms. Pac-Man($300)
Complete and functional; but cab needs replacement or lots of woodwork/TLC. G07 Monitor needs (included) cap kit installed. Resto not started, but includes new: repro CPO, buttons, carriage bolts, orig speed chip (fast installed), new vivid marquee, new t-molding, extra decent condition coin door (current one is trashed) monitor bezel is decent but not perfect.
Bally Galaga($300)
Complete and functional; but cab needs replacement or lots of woodwork/TLC. G07 Monitor needs cap kit installed. Resto not started, but includes new: repro CPO, NOS marquee, buttons, carriage bolts, speed chip, rapid fire PCB, new t-molding, extra decent condition coin door (current one is trashed) monitor bezel is decent but not perfect.
Bally Super Pac-Man($200)
Mostly complete and mostly functional; cab needs a fair amount of woodwork/TLC and a monitor bezel. G07 Monitor needs chassis repair, all else tested good. Marquee is good, coin door is rough. Resto not started, but includes new: NOS CPO, repro CPO, buttons, new t-molding, replacement control panel (current one is bent) with a decent original CPO on it.
Namco Aqua Jet($350)
Fair to good conditon 50" Deluxe jet ski game. Needs new 50" S-video capable TV or current one repaired. Cab (monitor case) is in fairly rough condition, 1 side of the side art is destroyed. PCBs are tested and work, air compressor is fresly rebuilt. needs an air hose fitting so pneumatic cylinders are not tested but was told all worked but the TV when bought. Needs a thorough cleaning and monitor plexi buffed.
Konami Boxing Mania($350)
Rare imported Japanese only cab, but easy enough to play. Cross DDR with physically beating the hell out of a machine and you got it down. Cab is in decent condition, a little rough on the bottom and cracks in the plexi, idiot safety pads are torn up but should be removed anyway. Missing the original and totally unnecessary floor mat. 25" Monitor is nice and bright, Motion sensors have been cleaned and work. Side punching pads and motors all good. Top (face) pad and motor are missing but does not significantly affect gameplay. Bottom "beating pad" works but needs adjustment.
In my quest entitled "sell everything I love dearly to pay for open heart surgery" I have decided to see if there would be any takers on everything pin/vid related I own.
If I am to take this like a man, I want to sell all of them, because it will be as painful to just sell my favs, but I say "up to" because you might not want all of them. You may rather me dispose of a couple of the cabs than store them. However, I will sell individual titles (prices listed)...everything is OBO but please make any offers reasonable. I am open to offers on partial lot as well. I know these aren't fire-sale prices, but I NEED money desperately. As a lot these are only $200 a game and although a few titles are clearly not worth that much, some are clearly worth much more. This is painful to do, but I am desperate.
Many of these are project/untested machines, many have all new parts to make them nice. Some of the vid cabs were destined for mame machines, and I can/will include some good computers and parts and such to do so if you buy the lot.
There are 11 Pins, and 19 Vids/cabs, and piles and piles of parts, extras, etc. I will give a rundown of titles and highlights of conditions.
Feel free to call me with any questions.
Justin
(281) 850-9086
**POST IS TOO LONG, PLEASE SEE PART 2 FOR REST OF LIST**
Pins:
Bally Cybernaut ($1000)
Great condition with minimal wear on some inserts. A 9 all the way around. Freshly rebuilt rectifier, sound board and SDU . MPU is an unmolested acid-free 6802 with remote battery pack. New shooter sleeve, rubbers, ball, NOS ramp tube. Does need new (proper) drop targets.
Williams Hyperball ($700)
Good condition, fresh full rebuild of every board except sound. New plastics, balls, and ball shooter, all noise mods and shooter mod done, custom HS saving rom and custom keychain. Bg is 8/10, is currently disassembled for cab paint touchup and new coin door (nice but not perfect coin door included). Good painted legs. Can reassemble before sale.
Bally Future Spa ($400)
Good condition but fully disassembled for PF restore. MPU is nasty (repaired) but works, fresh rebuild on SDU and rectifier, sound board untested. cab is faded/flaking, good painted legs, BG has 2 small cracks (have not yet triple thicked) PF has minimal paint loss around sunken inserts. most metal parts on top of PF were corroded, have bought about 60% of PF parts brand new (posts, springs, screws, flippers, rubbers, ball, etc.)
GamePlan Attila The Hun($500)
Great condition, rare game (prod. 500) MPU freshly rebuilt. New legs, rubbers, springs, ball. Spare SDU. Spare NOS plastic set. New drop target inserts (originals are worn). BG is 8/10, starting to flake/lift on the edges, needs TT. Cab is 9/10, PF has minimal paint loss around a couple inserts.
Williams Gulfstream($300)
Working EM (my only one) in fair condition for it's age. BG flaking significantly, cab is faded/marked, PF has notable but not terrible paint loss. Decent legs, New rubbers, ball, Score motor was rebuilt a few years ago.
Bally Space Invaders($300)
Complete but untested, assume not working. NOS spinner, new rubbers, custom flipper decals. BG's are pristine, cab is fair, PF has significant midsection paint loss as so many of them do.
Williams Time Warp($250)
Complete but untested, assume not working. Cab is in fair to rough condition, BG art is spiderweb cracked pretty bad. PF is dirty as hell but minimal paint loss (IIRC). Has orig. banana flippers. Spare bumper caps, rectifier board. new rubbers, new PF glass. Includes Leons Sys6 test ROM, since I assume it will need it.
Gottlieb Rock($300)
Complete but untested, assume not working. Cab is in pretty good condition, Translite faded pretty badly, PF is dirty with lifting mylar but no actual damage IIRC, I believe some of the posts and such need tumbling work. Plastics were trashed, but I have a perfect NOS set. New rubbers included. I think the legs were rough.
Bally Baby Pac-Man($400)
I'll call this one a pin. Complete but unsure of working condition. Bought with no MPU, power up would come up with a rolling screen. Vidiot flashes correctly, but rolling is either caused by monitor adjustment or vidiot. Bought a new MPU but haven't installed. PF has minimal paint loss, Good condition bezel bought and haven't even unwrapped. Marquee is good, side art is mostly intact, cab is somewhat rough (swollen bottom)...Control Panel is disassembled, comes with new CPO, spinner decals, t-molding, rubbers, and ball.
Fascination Inc. (ALI) Circa 1933($150)
Complete Coktail Pinball, but non-functional MPU. John Robertson can fix it, but it seems no one else can. PF is nice, cab is pretty good, plastics/apron are busted to hell.
ALI Eros One($250)
Complete Coktail Pinball, but (again) non-functional MPU. Same system and setup as Circa 1933. Everything in overall good shape. For either of these 2 machines (this one if bought separately) I have an additional (untested) MPU and wiring harness that may bring one to life. You can unplug and swap the PFs so I had intended on one good machine that I could switch PF back and forth.
Dedicated Vids:
Sega Star Wars Arcade Racer($1000)
Good condition 50" Deluxe Cockpit model. Minor bumps, scrapes and bruises, moderate screen burn. One side of side art is rough. Needs a little TLC and minor parts (grommets, screws, etc.)
Sega OutRun($400)
Good condition. Recent capkit on the monitor, metal map is mostly intact. CP has very minor damages. Side art has some scratches but is pretty good condtion. Cab is in overall good condition but needs repair on one side of the floor platform. Includes replacement steering wheel (installed one has a chunk gouged out), New uninstalled horn emblem, new floor mat. New (not installed) t-molding, spare shifter.
Atari Star Wars Upright($500)
Fair to good condition; complete but not fully tested. WG monitor powered up and no deflection led lit. PCBs are untested because it had a bad ARII when I bought it; I bought a newly rebuilt one after it went into storage. I am sure it needs a new big blue. Cab is rough around the edges, but side art is in overall good condition (red is faded of course). CP is nice, bezel is nice, paint on yoke is worn and probably needs new springs. Marquee is trashed (glass is shattered) but held together with tape and included.
Namco Cyber Sled($500)
Good condition;both monitors recently rebuilt but need color matching. Cab is in overall good condition, a little rough on the bottom edge of monitor section, IIRC the decals on the seats were a little rough. Missing a few stickers on one of the control panels. Analog joysticks (same as on Star Wars Trilogy) would not calibrate properly, so I bought 8 extra complete joysticks (machine uses 4) and the adjustment pots for the pot amp pcbs in case that was the problem. Never got a chance to finish checking. Marquee has a minor crack and includes new (not installed) t-molding. Spare set of PCBs (both sides) that worked but wouldn't network link. So I bought a whole new (installed) set.
Nintendo Punch Out!!($400)
Complete and mostly functional; Half disassembled for restore. Cab is in decent shape with minimal woodwork needed and paint. Plexi is good but needs buffing. Everything tested well except monitors, 1 was dead and one badly needed a cap kit. I have since aquired 2-3 additional untested EZ20s (included) so I am sure it won't be an issue to get 2 good monitors. Marquee is good, includes new (not installed) CPO, side art, t-molding.
Bally Ms. Pac-Man($300)
Complete and functional; but cab needs replacement or lots of woodwork/TLC. G07 Monitor needs (included) cap kit installed. Resto not started, but includes new: repro CPO, buttons, carriage bolts, orig speed chip (fast installed), new vivid marquee, new t-molding, extra decent condition coin door (current one is trashed) monitor bezel is decent but not perfect.
Bally Galaga($300)
Complete and functional; but cab needs replacement or lots of woodwork/TLC. G07 Monitor needs cap kit installed. Resto not started, but includes new: repro CPO, NOS marquee, buttons, carriage bolts, speed chip, rapid fire PCB, new t-molding, extra decent condition coin door (current one is trashed) monitor bezel is decent but not perfect.
Bally Super Pac-Man($200)
Mostly complete and mostly functional; cab needs a fair amount of woodwork/TLC and a monitor bezel. G07 Monitor needs chassis repair, all else tested good. Marquee is good, coin door is rough. Resto not started, but includes new: NOS CPO, repro CPO, buttons, new t-molding, replacement control panel (current one is bent) with a decent original CPO on it.
Namco Aqua Jet($350)
Fair to good conditon 50" Deluxe jet ski game. Needs new 50" S-video capable TV or current one repaired. Cab (monitor case) is in fairly rough condition, 1 side of the side art is destroyed. PCBs are tested and work, air compressor is fresly rebuilt. needs an air hose fitting so pneumatic cylinders are not tested but was told all worked but the TV when bought. Needs a thorough cleaning and monitor plexi buffed.
Konami Boxing Mania($350)
Rare imported Japanese only cab, but easy enough to play. Cross DDR with physically beating the hell out of a machine and you got it down. Cab is in decent condition, a little rough on the bottom and cracks in the plexi, idiot safety pads are torn up but should be removed anyway. Missing the original and totally unnecessary floor mat. 25" Monitor is nice and bright, Motion sensors have been cleaned and work. Side punching pads and motors all good. Top (face) pad and motor are missing but does not significantly affect gameplay. Bottom "beating pad" works but needs adjustment.
