FS Parts: FS: Handful of boards / parts

davidv851

New member

Donor 2015
Joined
Mar 21, 2015
Messages
27
Reaction score
0
Location
Damascus, Pennsylvania
Rating - 100%
2   0   0
Have to put in a bathroom for my Father-in-Law (post hip surgery, can't get into a normal tub), time to let some parts go. Prices are all o/b/o, might be interested in trades but mostly looking to pull cash together. If my prices are off, let me know! I'm not one to be offended, worst I can say is no.

Pinball Translites:
NOS:
Stargate (have 3) $75 each shipped
Big House - $30 shipped
Waterworld - $50 shipped
Class of 1812 - $100 shipped, overcut / has excess that needs to be trimmed to fit machine
Freddy - Nightmare on Elm Street - $75 shipped
World Challenge Soccer - $25 shipped
Cactus Jack - dime sized piece broken off in lower right side, NOS otherwise - $25 shipped


Used with minor wear
Demolition Man - $40 shipped
Judge Dredd - $40 shipped

Used with damage
Judge Dredd (scrape in corner, removed white backing in 4-6" arc)
Twilight Zone damage to lower edge, plastic is intact but art is missing up to 1/2 inch from the bottom across most of it, bubbles up to 2 inches near the gumball machine. This IS the original version with the star-shaped cutouts, make an offer?


Konami DDR EXT-IO board - pulled from a working system that was converted to StepMania, comes with the with the breakout board and harness to connect older cabinets to Python 2 mixes (Supernova, etc). $450 shipped to the US

In The Groove 2 System board - Works 100%. Was original ITG, was upgraded to ITG r21. Also have a partial set of decals / overlays to convert a ddr cab - just missing the marquee. Looking for $500 shipped. Also includes a spare ITG-IO board that has an issue - it partially connects when connected to USB, but isn't recognized.

Also have the below Playchoice 10 games, also have a "project" main board that's missing a ROM or two and the heatsync from the PPU; haven't tested it at all but would let it go for $75:
Baseball - $35
Double Dribble - $75
Mike Tyson's Punch Out - $75
Pro-wrestling - $30
Rush'n attack (X2)- $40
Super Mario Bros (x2)- 65


Also have a number of other DDR solo parts around, some doubles as well, let me know if you're looking for anything.
 
Last edited:
I have one complete machine, and one mostly complete machine. The near complete one I may part out, it's missing the light driver board (the solo specific one that drives the pad bulbs) and has been a bit hacked (wiring spliced around the interlock, that sort of thing). The one is missing the header neons, too.

2 complete pads, too, the "dx" version I think they are called that have the bar and lights down the sides. Some rusted screws I drilled the heads off, but complete otherwise.

As time goes on I'm planning on refurbishing the one machine, the other one is sort of coming apart at the seams and will likely be parted.
 
Bump. That stuff from the other Solo still available? I need stuff like the plexi from the top marquee (would like the entire box to be honest), the bottom metal stand that mounts to the machine, and a few other things.
 
Back
Top Bottom