FS: Game PCBs and a Monitor Chassis

metahugh

Active member
Joined
Jun 10, 2004
Messages
6,127
Reaction score
20
Location
Michigan
Rating - 100%
29   0   0
Pictures:

http://gallery.metahugh.com/main.php?g2_itemId=30681

Gunsmoke with Jamma Adapter: $45 plus shipping
Someone broke off the sync pin on the PCB itself. I installed a jumper to ground the sync connection on the JAMMA adapter, works great

Double Dragon Bootleg PCB: $10 plus shipping
No sound, the amplifier IC is missing. Plays fine some occasional graphic glitches, very minor

Time Pilot Bootleg PCB: $8 plus shipping
Bootleg, powers up but has a lot of video issues.

Wells Gardner K7000 Monitor Chassis for 19" (P447): $30 plus shipping --- SOLD ---
I replaced the flyback and caps on this one about a year and a half ago but consider it a project. It had a picture for about 15 minutes and then went out. Have not troubleshot as I do not have a tube to test in.

Capcom CPS2 A Board: $15 plus shipping --- SOLD ---
This came with a set of Green B boards, works fine sold the B boards

Can pickup for free in Richmond, VA.
 
Last edited:
Back
Top Bottom