FS:FT: Space Invaders Boards Not working

ikillrinst

New member
Joined
Feb 12, 2011
Messages
199
Reaction score
5
Location
New Jersey
Rating - 100%
5   0   0
I bought 4 PCB sets off of Kennyp2112, that were sold to me as parts boards,

1 Set of Extra Innings. I pulled the processor today(11/7/11 and cleaned all the legs and replaced, and now I get this image posted below on the screen.. I have the sound card also but no way to connect it and test it to see if I get a picture because the connections on the Extra Innings sound card are different than the wires in my SID, the board will need new roms and sockets. $50 shipped in the US for the set.


These Boards are also for sale or Trade, or Trade for repairs to my own boards


2 sets of Space Invaders





I was hoping for some signs of life out of at least one of these boards.. After Close examination I can see some are missing caps, some have broken resistors, traces and boards themselves look ok.. I tried them in my machine and played around with no luck. I cleaned the boards up a bit and now have decided I do not know enough about PCB repair and do not want to further mess up these boards. I would like to trade them to someone who can fix my own personal set of boards. or sell them.

PM me for faster response, It is easier to check PM's from my phone than to check the thread.


Image is of the Extra Innings board in my SID cab with no daughter card attached..
ExtraInnings.jpg
 
Last edited:
Nobody?..
If you know how to repair them, no board is ever too far gone to repair, traces all look good, just bad or missing components.
 
Last edited:
I am not asking for a lot. I know If i knew how to repair boards I would snatch these up.. Will be more valuable as they become more and more scarce
 
What other boards need repair?



I bought 4 PCB sets off of Kennyp2112, that were sold to me as parts boards,

These Boards are also for sale or Trade, or Trade for repairs to my own boards

2 sets of Space Invaders
1 Set of Space Invaders Deluxe
1 Set of Extra Innings (uses the same main board as SI, SID, Sea Wolf and a few others)

I was hoping for some signs of life out of at least one of these boards.. After Close examination I can see some are missing caps, some have broken resistors, traces and boards themselves look ok.. I tried them in my machine and played around with no luck. I cleaned the boards up a bit and now have decided I do not know enough about PCB repair and do not want to further mess up these boards. I would like to trade them to someone who can fix my own personal set of boards. or sell them.

PM me for faster response, It is easier to check PM's from my phone than to check the thread.
 
none of the main boards I listed work, So I don't know if any of the sound boards work.. if that's what your asking
 
I have the Extra Innings board set partially working, But cannot test any further. Connections on the sound card are different than the wires in my SID cabinet.. Needs new roms and sockets.. Updated in first post...

$50 Shipped for the set in the US..

ExtraInnings.jpg
 
Back
Top Bottom