FS/FT: Lots of PCBs, Marquees, CPs, etc.

Scott C

Well-known member

Donor 3 years: 2022-2024
Joined
Apr 15, 2009
Messages
9,716
Reaction score
1,805
Location
Missouri
Rating - 100%
68   0   0
The following parts are for sale or trade. If you don't like my price, then make an offer or suggest something in trade. I will combine shipping (why make it hard for any of us?). I am always looking for mini and cabaret parts from numerous manufacturers. I do not have pics at this point. Prices do NOT include shipping, which will be via USPS.

Note: Most PCBs are untested and assumed bad, either because I truly don't have the time to test them or cannot. I have
a JAMMA test bench and some adaptors, but I am not going to pull out a game cabinet to test a boardset. Parts are
priced accordingly. If a board is clearly damaged or bad it will be noted (again, assume everything is not working,
unless noted otherwise). If the description says "dirty", assume the PCB is filthy and will need a good bath/cleaning
before using.

Marquees:
========
- Night Stalker (applied to glass, can be removed) - $15
- Time Pilot '84 (bottom edge very rough, but could be cut to look nice) - $10 (Sold)
- Gladiators (translite) - $15 (Sold)
- Stargate (plexi) - $15 (Sold)
- SEGA Champion Baseball - $10

Bezels:
=====
- Jack The Giant Killer - $15

Control Panels:
===========
- Taito Crazy Climber (missing one knob, complete otherwise) - $20
- Pac-Man - CPO, includes wood & everything minus the stick - $20 (Sold)
- Ms. Pac-Man - CPO, includes only two buttons - $15 (Sold)
- Ms. Pac-Man - CPO, includes joystick, some wiring, no buttons - $20 (Sold)

Manuals:
=======
- Sente/Night Stalker - $10 or FREE w/purchase of NS marquee & boards

Power Supplies:
===============
- Condor - Missing fuse (Star Castle, Dragon's Lair,Space Ace, etc.) - $30 (Sold)

Misc:
=====
- Gyruss adapter to 44-pin harness (which one, who knows???) - FREE (Claimed)
- Four colored curved monitor plexi (green,yellow,red & blue stripes) - FREE (Claimed)

Boards:
======
*Amstar*
- Phoenix - $20 (tested & appears to work, may be my JAMMA test bench, but won't coin)

*Atari*
- Fire Truck (missing 1 PROM) - $30 (Reduced $)
- Fire Truck (missing 1 PROM) - $25 (Reduced $)
- Sprint 4 - $20 (Reduced $)
- RFI shield (1981, 2 edge connectors) - $5
- Cops & Robbers (1976) - $15 (Reduced $)
- Breakout - $20 (Sale Pending)
- Dig Dug (not working, bad custom ICs) - $10
- Dig Dug (not working, missing ICs, goofy socket needs replacing) - $10
- Kangaroo (not working, complete) - $15
- Kangaroo (not working, complete) - $15

*Bally/Midway*
- Sente Night Stalker, include main PCB and NS ROM PCB - $30 (Reduced $)
- Pac-Man (missing 284, 285, RAM and some PROMs - possibly CPU) - $20
- Pac-Man (missing 284, 285 and 2 PROMs - possibly CPU) - $20
- Pac-Man 284 (adapter socket legs crushed) - $5
- Gorf (4 PCBs-ROM <not sure if all PROMs),CPU,Pattern,Game - no card cage) - $20 (Reduced $)

*Capcom*
- Gunsmoke (Capcom) - $20 (Sold)
- Ghost'n Goblins (Capcom version is called Makamura/Makai Mura) - $30 (Sold)

*Cinematronics*
- Star Castle (on metal mounting plate,nice & clean w/cables) - $45 (Sold)
- Star Castle (on metal mounting plate,dirty,w/cables,few broken parts,repairable) - $20 (Reduced $)
- Single PCB (1977, may be missing a 2nd 1/2, labeled "2076 Rev. B") - $5 (Sold)
- Regulator PCB (1982, small) - $10 (Sold)
- Jack The Giant Killer (labeled "Game-2B", "Game-2A", has aux PCB) - $20

*Exidy*
- Pepper II (includes external audio PCB, dirty) - $15 (Sold)

*Konami*
- Time Pilot '84 (GX388, testing and working) - $20 (Sold)
- Track & Field (GX361, marked bad amp, dirty) - $15 (Sold)

*Misc*
- Ms. Pac-Man bootleg PCB (MPO1, AKA 2nd gen PAC3 PCB, w/wiring adapter,bad PROM,dirty) - $15 (Reduced $)
- Karate Champ bootleg (titled Karate Master) - $15
- Sequential Circuits Inc (1983, PCB marked "Z 315") - $???

*Nichibutsu/Nihon Buson*
- Crazy Climber (Nichibutsu, missing all PROMs) - $15 (Sold)
- Crazy Climber (Nichibutsu, missing some PROMs) - $20 (Sold)
- Terra Cresta (Nichibutsu, 2 boardset, labeled TC-1A & TC-2A) - $20 (Sold)

*Nintendo*
- Duck Hunt VS kit (marquee, PROM, instructions, stickers, etc.) - $25 (Sold)
- VS. master PCB w/Hogan's Alley installed (MDS-05-CPU) - $25 (Sold)

*SEGA*
- Turbo (dirty) - $15
- Pengo (missing some PROMs) - $15 (Sold)
- Champion Baseball - $15

*SNK*
- Neo Geo single slot main PCB (tested,intermittent booting) - $20 (Sold)
- Neo Geo "3 Count Bout" cartridge (can't test due to above) - $20
- Neo Geo "World Heroes 2" cartridge (can't test due to above) - $20
- Neo Geo "The Next Glory Super Sidekicks 3" cartridge (can't test due to above) - $20 ($30 are all 3!)
- P.O.W (tested working) - $20

*STERN*
- Frenzy (complete boardset & PS w/connecting cables & wiring harness) - $50 (Reduced $) (Sale Pending)

*Taito*
- Gladiator (Two boardset, marked PO-003B) - $15 (Sold)

*Williams*
- Defender CPU (no ram,decoders,CPU,few broken diodes/resistors & reset butn) - $10 (Sold)
- Defender CPU (no decoders, 2 ICs or CPU, dirty RAM) - $15 (Sold)
- Defender CPU (no ram or decoders,dirty) - $15 (Sold)
- Stargate ROM PCB - $15 (Sold)
- Joust/Robotron ROM (D9144, no PROMs) - $10 (Sold)
- Defender/Stargate/Joust/Robotron/Bubbles Sound (D8244, no CPU) - $15 (Sold)
- Joust/Robotron CPU (C, missing 1 RAM, dirty, cracked by connector) - $10 (Sold)
- Joust/Robotron CPU (C, complete, dirty, some rust) - $15 (Sold)
- Stargate/Robotron CPU (B, missing decoders, dirty, 2 wires need resoldered) - $15 (Sold)
- Stargate/Joust/Robotron/Bubbles Widget (C8783) - $10 (Sold)
- Metal mounting plate - $10 (Sold)

*Universal*
- Mr. Do! (with power amp attached, dirty) - $15 (Reduced $)

*Vectorbeam*
- Tailgunner ROM PCB (80-10518A) - $30
 
Last edited:
hmmmm..... aren't you selling any cabarets? :)
I have a Galaxy Ranger (working) if you are interested. :)

Actually, I did just sell a mini, but will let the buyer speak-up if they want to. :) I do have some cocktails on the way, if you want those? :)

Scott C.
 
Keep the offers coming in, folks. I will start updating the initial post as folks confirm their orders.

Numerous (duplicate) items have been inquired about, so if you definitely want something, say so and I will mark them yours. Otherwise, don't be mad when they are gone.

Scott C.
 
no laser discs for me, and no more room for more cocktails.

but always more room for more cabarets!

if you do sell more, let me know.
 
The initial listing has been updated to show what has been confirmed sold as of this posting. There are about 10 outstanding inquiries for parts not claimed yet and some of these overlap. If you asked about something, then I have responded to your PM. If you want it, then please let me know. Thanks.

Happy gaming.

Scott C.
 
The initial post has been updated again and lots more stuff has been sold. I still need to hear from quite a few folks about the stuff they asked for. Thanks.

Scott C.
 
More stuff has been claimed, but there are still a few folks that need to PM me a response.

If you see something you want, then shoot me an offer or trade. I would like all of these parts to find a good home.

Scott C.
 
Wow! No love for the Atari or Midway stuff. I figured the Fire Truck stuff would disappear in a hurry. I may add the missing parts to the Pac-Man PCBs, so they can be tested, since they look like they should work. If not, they are pretty easy to fix.

Anyone interested, if they are working or working minus the 284 & 285 (I only have so many)?

Scott C.
 
Wow! No love for the Atari or Midway stuff. I figured the Fire Truck stuff would disappear in a hurry. I may add the missing parts to the Pac-Man PCBs, so they can be tested, since they look like they should work. If not, they are pretty easy to fix.

Anyone interested, if they are working or working minus the 284 & 285 (I only have so many)?

Scott C.

I am interested in them, but I dont have any 284/285s...
 
Since the Pac-Man PCBs haven't sold yet, I will probably pull them, put them on the bench and see if I can get them running.

Everyone else, the list has been updated and there are still some items available. I would like to sell it all, so make me an offer and maybe I will bite. :)

Scott C.
 
I"m not sure where you're located, but any chance you are going to the NW Pinball and Video Game show? I'd make you an offer on everything that's left if I didn't have to have it shipped... :)
 
I"m not sure where you're located, but any chance you are going to the NW Pinball and Video Game show? I'd make you an offer on everything that's left if I didn't have to have it shipped... :)
I wish I could go to the show, but it's just not in the cards. I am located in the Kansas City metro area. If you're close enough, come on by and I can show you the arcade at the same time.

Scott C.
 
Back
Top Bottom