FS/FT... Daytona Twin Sitdown

Tim N.

Member
Joined
Sep 13, 2007
Messages
289
Reaction score
1
Location
Helenville, Wisconsin
Rating - 100%
3   0   0
I bought this pair during the summer thinking it would get played a lot..... It doesn't... I am a pinball guy, and that is all that gets played (my pins)....

The Good:
Both sides work 99.99% (read under the bad for the .01%)
Extra boards- including force feedback boards, sound boards, and misc. boards (no Main CPU boards though) no surprises, a working daytona with great force feedback, etc...

The Bad:
Right side monitor needs a cap kit/solder reflowed (both could use caps). The right side monitor will cut out during game play. If the machine is left on for longer than 30 minutes, the right side stays on and works perfectly. I am guessing it just has some dry joints. I wasn't going to address this until I recapped the monitors (both sides), but since I am the only one that plays it, I really have had no motivation to cap the monitors yet...

The right side monitor has a Nanao, the left side is a Midway.....

The artwork is nowhere near perfect....



That is about it....If there is enough interest I can take pics and post them...

I am asking 900.00 for everything if I cap the monitors.... 800.00 as is....

Would consider trades for pins (open to lots of pins, let me know what you have) and can go cash either way depending on the pins....

Location is SE Wisconsin- halfway between Madison and Milwaukee.....
 
Yep..tis I and I'm kinda looking for a pair of sitdown drivers.

There's also a couples of Daytonas in Alberta somewhere.

I got an idea..wrap up the drivers in the WoF box and do a 'refuse shipment'...ya think it'll work?
 
Back
Top Bottom