SP005
Member
I am offering my Black Knight pin for sale or trade. The machine plays nice, and the playfield as you can see from the photos is in excellent condition, and no wear spots anywhere including the magna saves. The boards were all gone over by me and electrically reworked when I first got the machine. There are no problems with any of the displays, sounds, magnet, or bell. The plastics and bumper cap are all okay too. The back glass is flaking I'd rate it a 7/10, and isn't as bad as some I have seen.
The cabinet is okay, but can use some touching up as there are a few scratches and nicks/scrapes. The worst part is the backside where the particle board was broken at the bottom. This sounds worse than it really is, and it can be patched. A few other misc things are the lock in the head has the key broken off in it and I'm missing 2 drop target decals. Slowly I'm getting around to addressing these issues, only I know the machine is not a keeper in my collection so motivation is tough.
I've had this listed on/off Craigslist the past few months as well as Mr. Pinball for $1500 which admittedly is high, figuring I would either be haggled down or else maybe I'd catch the Christmas wave. After a few tire kickers, I want to move this one out and move something else in. I am willing to entertain fair offers, especially if I don't have to finish the cabinet work.
I'm also willing to trade for it or towards it. I would love to find an Apollo 13 in the area in any condition, but would seriously consider any SS or DMD machine. My tastes lean toward DMD, so something B/C list might be fair. Just let me know what you have and we can go from there, anything from a project up to fully shopped is okay with me. I'm in north/central NJ, zip 07016. Easy access from the GSP, 22, 78, or Turnpike. If you want to drop by this weekend to check things out let me know.
I have a party coming up in about 3 weeks and would love to have the new machine installed by then.
Stephen
[email protected]
The cabinet is okay, but can use some touching up as there are a few scratches and nicks/scrapes. The worst part is the backside where the particle board was broken at the bottom. This sounds worse than it really is, and it can be patched. A few other misc things are the lock in the head has the key broken off in it and I'm missing 2 drop target decals. Slowly I'm getting around to addressing these issues, only I know the machine is not a keeper in my collection so motivation is tough.
I've had this listed on/off Craigslist the past few months as well as Mr. Pinball for $1500 which admittedly is high, figuring I would either be haggled down or else maybe I'd catch the Christmas wave. After a few tire kickers, I want to move this one out and move something else in. I am willing to entertain fair offers, especially if I don't have to finish the cabinet work.
I'm also willing to trade for it or towards it. I would love to find an Apollo 13 in the area in any condition, but would seriously consider any SS or DMD machine. My tastes lean toward DMD, so something B/C list might be fair. Just let me know what you have and we can go from there, anything from a project up to fully shopped is okay with me. I'm in north/central NJ, zip 07016. Easy access from the GSP, 22, 78, or Turnpike. If you want to drop by this weekend to check things out let me know.
I have a party coming up in about 3 weeks and would love to have the new machine installed by then.
Stephen
[email protected]