FS/FT 45 Coin Mechs

Arcadenut

Well-known member
Joined
Jun 12, 2003
Messages
9,355
Reaction score
4,887
Location
Glendale, Arizona
Rating - 100%
43   0   0
I am converting all my games to .900 Tokens and I have 45 Coin Mechs that will not work so I am selling them or will trade them for coin mechs that will work.

The majority of them are Plastic, a few metal ones in the bunch.

coinmechs.jpg



$5 each, or will trade for working .900 mechs. If you don't have .900 mechs, I am looking for specific style of Metal Coin mechs that I can adjust to work with .900 tokens.

The ones I'm looking for usually have a sticker on them labeled 130-25 and look like this:

frontofmech.jpg

backofmech.jpg

backofmech2.jpg
 
I know nothing about mechs, but I want to get two working ones for my Wizard of Wor and this seems like a great way to do it. Is there a way for me to figure out which mech is gonna be all right with the standard WoW coin door? Is it not even an issue? (Sorry to start your thread off with a pain in the ass question, AN.)
 
just curious as to why they wont work.. i thought that with the plastic ones, all you needed to do was file some of the plastic away? maybe i am getting them confused..
 
just curious as to why they wont work.. i thought that with the plastic ones, all you needed to do was file some of the plastic away? maybe i am getting them confused..

You're thinking of the .94 Tokens. The .900 are too small and they pass right between the Rocker arms.
 
Brien,

I will have about a 15-20 of these Coin Mech Inc brand available by the week's end.

They're set to quarters.

I'll be pulling them this week as I'm converting to .984's and I really don't want go through adjusting these (Coin Control ones are easier for me to convert).

If you're interested in a bunch of these, send me a pm.

-L.
 
You're thinking of the .94 Tokens. The .900 are too small and they pass right between the Rocker arms.

I realize this thread is a bit old, but I didn't bump it.

FYI: I modded all of my coin controls quarter mechs to take .900 tokens. All you do is take a flat blade screwdriver and bend in the bottom lip of the rocker arm slightly. Then it will catch and divert the .900 tokens. 9 times out of 10, not adjustment of the bottom diverter was needed.
 
Back
Top Bottom