OFF TOPIC FS/FT: 2 Person Indoor/Outdoor HUO NOS Hottub
You heard right! For sale/for trade is this nifty little HUO NOS Mr. Spa 2 Person Indoor/Outdoor hottub. This unit came with the house and did work before it was drained/dismantled and stored in my garage. This is a stand alone unit that runs on a 120v line and is completely contained in fabulous wood trim. From the plate the Model is 606, Serial no is 16092 and the manufacturing date is from 5-15-87.
It's a nice unit but the previous owners put it in the most awful spot in the house and essentially mildewed/molded up the drywall with the moisture from it so we pulled it and stored it. Our loss is your gain! OMFGBBQ!
It needs a good cleandown with some CLR on the jets to clean up some calcium deposits and there's a bubble in the upper fiberglass shell, which I've read is a pretty simple repair with some acrylic and paint. A little DIY action and this could be as good as new!
Also note that there are NO LEAKS, even with the bubble, which is superficial.
My wife and I want this gone, local pickup only or you figure out freight from 46368.
Make an offer, anything could be accepted. Also realize I am not a SPA repairman or salesman so if you take it, it's yours with the good or the bad, kinda like your wife if you have one.
For trades, I'd accept the following: Joust cab/parts, Pac parts, Rootbeer Tapper parts, Tempest PCB, Nintendo Widebody or DKjr cab/parts, Exidy Venture cab/parts, would also consider general parts like working monitors, etc and anything else that could be interesting.
Includes cover. PM with questions or you can request my cell and we can talk it out.
You heard right! For sale/for trade is this nifty little HUO NOS Mr. Spa 2 Person Indoor/Outdoor hottub. This unit came with the house and did work before it was drained/dismantled and stored in my garage. This is a stand alone unit that runs on a 120v line and is completely contained in fabulous wood trim. From the plate the Model is 606, Serial no is 16092 and the manufacturing date is from 5-15-87.
It's a nice unit but the previous owners put it in the most awful spot in the house and essentially mildewed/molded up the drywall with the moisture from it so we pulled it and stored it. Our loss is your gain! OMFGBBQ!
It needs a good cleandown with some CLR on the jets to clean up some calcium deposits and there's a bubble in the upper fiberglass shell, which I've read is a pretty simple repair with some acrylic and paint. A little DIY action and this could be as good as new!
Also note that there are NO LEAKS, even with the bubble, which is superficial.
My wife and I want this gone, local pickup only or you figure out freight from 46368.
Make an offer, anything could be accepted. Also realize I am not a SPA repairman or salesman so if you take it, it's yours with the good or the bad, kinda like your wife if you have one.
For trades, I'd accept the following: Joust cab/parts, Pac parts, Rootbeer Tapper parts, Tempest PCB, Nintendo Widebody or DKjr cab/parts, Exidy Venture cab/parts, would also consider general parts like working monitors, etc and anything else that could be interesting.
Includes cover. PM with questions or you can request my cell and we can talk it out.
Last edited:
