FS: Exidy Pepper II Side Art.

ChompingQuarters

Well-known member
Joined
Oct 18, 2006
Messages
10,196
Reaction score
68
Location
Clinton Township, Michigan
Rating - 100%
58   0   0
Just finished scanning, retouching, Vectorizing and color matching Pepper II side art. Solvent InkJet Printed by This Old Game on the best 3m glossy vinyl and Plotter Cut. This art was produced from NOS side art (thanks to Rick Ford who supplied the NOS art) and used a combination of both raster and vectorized to produce a very accurate reproduction.

Price is $80.00 + $10.00 S/H (Continental USA) for both sides of the set. If you are located in Alaska, Hawaii or Outside the continental USA contact me for a shipping quote.

Available here!!!

http://www.chompingquarters.com/store.php/products/pepper-ii-side-art?

PepperII_Repro_1.jpg


Full reproduction details here.

http://www.chompingquarters.com/2011/09/reproduction-pepper-ii-side-art-now-available
 
very cool man.. any word on that VENTURE side art you were working on??

Brian Jones (prok) was actually vectorizing Venture side art from my scans... Between the two of us we are hoping to have nice reproduction art of Venture, Mouse Trap (Side art and Brian will be doing screened CPO's) and now Pepper II... Now that Pepper II is complete I'll probably get back on Mouse Trap.
 
I don't own any of these, but this is AWESOME!
My buddy Dan (p1899m) has a few of these games, and they are fun to play.

nice work on this guys

very nice
 
I don't own any of these, but this is AWESOME!
My buddy Dan (p1899m) has a few of these games, and they are fun to play.

nice work on this guys

very nice

Thanks. It is a fun game. However, I never played it before MAME and on a monitor which needed a cap kit! Might bring the PCB down to the arcade and install it into the Venture for the winter.
 
Rich is printing these for me sometime today. If you want a set from the first run let me know ASAP. This is solvent ink jet so we can run them as needed. However, if you need a set for your machine or project as soon as next week then order today.
 
Sideart

Nice work. Im looking forward to that Mouse Trap. The piece of original I have still on the paper has a rip through the dog.
 
you got it bro.. set a set aside! Also, is the CP the same as venture, except for the fire buttons?
 
is the CP the same as venture, except for the fire buttons?

Many venture cps were converted to pepper II's. Factory and probably kit. Differences are that venture uses two small buttons for 1 and 2 player select and venture has a much smaller hole in the cp for the joystick. And of course uses a different joystick. For the correct joystick to fit you have to make the hole considerably larger. Other than this they are the same though.
 
sounds like i could definately convert it. I need to check the pinouts and see if i can use a venture harness. Hard part may be finding a pepperII boardset. One of my favorite games of all time, and i only ever played it on coleco.
 
sounds like i could definately convert it. I need to check the pinouts and see if i can use a venture harness. Hard part may be finding a pepperII boardset. One of my favorite games of all time, and i only ever played it on coleco.

I would be more than happy to get you the hole dimensions on the pepper II panel.
 
i'd probably be after your spare CP bill, it sounds like it's in better shape than mine, then convert my panel..
 
Back
Top Bottom