FS Parts: FS: Dragons Lair Logic Board complete

obs

Member
Joined
Mar 16, 2011
Messages
247
Reaction score
0
Location
Calgary, ab, Canada
Rating - 100%
2   0   0
Working when tested years ago. Its been sitting doing nothing.
Can burn Space Ace roms in place of Dragons lair roms if requested.

$300 includes shipping anywhere in North America.
 

Attachments

  • 28081432_10155005795857130_1733143203_o.jpg
    28081432_10155005795857130_1733143203_o.jpg
    562.5 KB · Views: 67
That's a rev. C board that will work with both PR-7820 and LD-V1000 players.

Scott C.
 
That's a rev. C board that will work with both PR-7820 and LD-V1000 players.

Scott C.



FYI, if you use a Merlin, you can use any rev PCB with any of the modern players that Merlin supports.

These days, there's little reason to use a 7820 or v1000 IMO (if you can even find a working one), as the newer players are much better in terms of seek time, reliability, etc.
 
Andy, I completely agree, but there are those that want original. Just last week, I setup a DL and SA to use a Dexter and Merlin. Great stuff and Shaun Wood was very helpful.

When the Dexters are run again I'll have to get one.

Scott C.
 
Andy, I completely agree, but there are those that want original. Just last week, I setup a DL and SA to use a Dexter and Merlin. Great stuff and Shaun Wood was very helpful.

When the Dexters are run again I'll have to get one.

Scott C.



Well, as I say, there are two types of DL owners - ones that are using a Merlin, and ones that will be.

I'm all for keeping things original, but in this case the original players have a fixed shelf life, due to the laser tubes, which weaken and can't be replaced. (Is anyone actually even still reliably running an original player? I personally don't know of any myself.) Not worth the hassle IMO. But to each his own...
 
Back
Top Bottom