FS : Donkey Kong/Nintendo Parts galore!

ballytablewiz

Well-known member
Joined
Jun 11, 2010
Messages
2,246
Reaction score
140
Location
Arkham, Massachusetts
Rating - 100%
231   0   1
I have decided (reluctantly) to part with some of my Donkey Kong hoard. (more on P2) ***UPDATED 10/22***

Prices now DO include shipping, and I deal exclusively in Money Orders.

Since there is so much to list and many pics, I will list items in multiple posts, so be sure to read this entire thread when looking for stuff. Some items I have multiples for sale, I will blank out prices when an item is no longer available. "Pending" sales will have 7 days for payment to reach me and then hold status will be removed.
_________________________________________________

Donkey Kong coin box assembly : Complete from cabinet wall to cabinet wall, including original screws used to fasten it to the cab. I will NOT separate pieces. This is perfect for you scratch build guys out there. - $50 SHIPPED

Nintendo speaker assembly : Complete with original fasteners, connector plug, and cabinet grate. Works perfect. - *SOLD*

Nintendo cabinet handle pull grates : Complete with original fasteners. - $10 SHIPPED

Nintendo control panel latches and mounting plate : Complete with original fasteners. - $10 SHIPPED

Nintendo monitor bezel retainer : Complete with original fasteners, mount plate, and studs (nobody has those!) (Stock:2) - $15 SHIPPED
 

Attachments

  • FILE0228.jpg
    FILE0228.jpg
    99.3 KB · Views: 43
  • FILE0233.jpg
    FILE0233.jpg
    101.3 KB · Views: 31
  • FILE0235.jpg
    FILE0235.jpg
    103.7 KB · Views: 43
  • FILE0237.jpg
    FILE0237.jpg
    107.1 KB · Views: 27
  • FILE0239.jpg
    FILE0239.jpg
    107.2 KB · Views: 51
Last edited:
the continuing saga of Buffalo Kong

Nintendo marquee top bracket : Complete with original fasteners. - *SOLD*

Nintendo lower marquee/top bezel bracket : Complete with original fasteners. - *SOLD*

Donkey Kong marquee : Nice shape, typical small areas of corner wear, probably covered when mounted. Kong has sticker residue on him and I'm out of Goo Gone, guaranteed it comes off with GG. - *SOLD*
 

Attachments

  • FILE0241.jpg
    FILE0241.jpg
    94.7 KB · Views: 25
  • FILE0244.jpg
    FILE0244.jpg
    94.4 KB · Views: 21
  • FILE0246.jpg
    FILE0246.jpg
    92.1 KB · Views: 40
  • FILE0248.jpg
    FILE0248.jpg
    103.5 KB · Views: 15
Last edited:
sorry Steve, Billy and Hank - *I* am the King of Kong

Donkey Kong marquee : Great shape, no significant scratches. Again with the adhesive residue, this time on the bottom where the holder was glued on (why, oh why did N* do that?!) Likely comes off with Goo Gone. - *SOLD*

Nintendo monitor blinds/cardboard shields : ONLY available with purchase of BOTH bezel and marquee (best time to ship them) for an additional *SOLD*
 

Attachments

  • FILE0250.jpg
    FILE0250.jpg
    93.1 KB · Views: 28
  • FILE0253.jpg
    FILE0253.jpg
    101.9 KB · Views: 24
  • FILE0255.jpg
    FILE0255.jpg
    102.3 KB · Views: 27
  • FILE0256.jpg
    FILE0256.jpg
    101 KB · Views: 29
Last edited:
c'mon, c'mon, c'mon, c'mon do the Donkey Kong, do the Donkey Kong!

>>> Be sure to look at Page 2 for more great stuff! <<<

I will not reserve anything not currently listed, so watch for my posts!

Donkey Kong (& JR) ULTRA COMPLETE power supply : Includes psu, iso, outlet, fuseblock, wingnuts, power switch/fuse assembly, mounting screws, power cord (wires cut but original molex connector is included for easy reconstitution). Everything you need to go from the wall to the cabinet floor. All working 100% - *SOLD*
 

Attachments

  • FILE0262.jpg
    FILE0262.jpg
    92.4 KB · Views: 43
  • FILE0265.jpg
    FILE0265.jpg
    93.1 KB · Views: 33
Last edited:
since you're going to ask

Items I want and will offer trade-in credit for:

Donkey Kong 3 pcb
Mikie pcb
Frogger sound pcb only (Sega/Gremlin)
Circus Charlie pcb
Popeye pcb
Space Firebird pcb

ALL wanted working 100%, I don't want your broken garbage.

I also would one N* 25mm joystick ball, used on N* cocktails as well as some later uprights. And Takigen/GSK K6510 tubular locks in good condition.
 
Last edited:
Well it will be a bit, but not outrageous. I would think something along the lines of $20, max $25 within the continental US.

Since it is one of the big items I cannot estimate fully, once genuine interest is shown I will obtain a shipping quote. Essentially, PM me with intent.

Donkey Kong coin box assembly how much would shipping be on this? I'm interested in this soo i can restore my DKJR Cab

As for all queries relating to "Do you have this?," as stated above I will not hold any item not currently listed and I already have it set in my mind what is going to be listed, so asking now is fruitless. Sorry, but I gotta give everyone a fair shake at this stuff.

I have updated all stock above and am going to take more photos now and prepare for another batch...

MOAR STUFF now on PAGE 2!! >>>>>>>>>>>>>>
 
Last edited:
Yeah i understand the shipping price would be kinda high for this being a Wood Item.

I guess i would have too know what kind of price range it would be shipped before . I could say yes or no in buying it.

Can it be safely taken apart too make it not cost soo much too ship?

I know for a fact i will have the money for this in like 2 weeks i have a Birthday coming. But i can understand your not being able too hold something.
 
You pick the hammer up and then you put the fire out...

First up today are my Donkey Kong cocktail leftovers. A few of these items were "sold" and then never paid for, so lucky you!
_______________________________________________

Donkey Kong cocktail legs : Complete assemblies, I will include all original fasteners. Manual states these are Style "F" cocktail legs, that reach to the lid of the cabinet and provide the strongest support. - *SOLD*

Donkey Kong/Space Firebird cocktail lid securing hardware kit : Includes 3 locks, all keyed to the same included key, top brackets the latches hold onto, original mounting screws, and swing arm latches with E-clips - *SOLD*

Donkey Kong Asahi Seiko KWM-740 coin mech : Same model used for both cocktail and upright versions. Excellent condition. Includes original mounting screws. Does NOT include microswitch. - *SOLD*
 

Attachments

  • FILE0139.jpg
    FILE0139.jpg
    109.2 KB · Views: 15
  • FILE0157.jpg
    FILE0157.jpg
    109.3 KB · Views: 19
  • FILE0267.jpg
    FILE0267.jpg
    91 KB · Views: 16
  • FILE0269.jpg
    FILE0269.jpg
    95.1 KB · Views: 24
Last edited:
... Donkey Kong Asahi Seiko KWM-740 coin mech : Same model used for both cocktail and upright versions. Excellent condition. Includes original mounting screws. Does NOT include microswitch. - $10 plus shipping

Interested. PM sent.
 
Now I think you know what Donkey Kong is all about!

And now for your Friday night shopping pleasure, I present to you :

Nintendo coin door : Nice condition, no major dents, original fasteners included. - *SOLD*

Donkey Kong Asahi Seiko KWM-740 coin mechs (2) : Matched pair (sequential #'s), both have microswitches, but only one has the actuator arm. Fully functional. Looking to keep them as a pair for the purists. - *SOLD*

You're not going to want to miss this next one...
 

Attachments

  • FILE0271.jpg
    FILE0271.jpg
    92.5 KB · Views: 27
  • FILE0272.jpg
    FILE0272.jpg
    94.8 KB · Views: 22
  • FILE0274.jpg
    FILE0274.jpg
    93.6 KB · Views: 25
  • FILE0275.jpg
    FILE0275.jpg
    97.7 KB · Views: 26
Last edited:
How High Can You Get?

And now, the meat and potatoes for tonite - Wiring!
_____________________________________________

Donkey Kong wiring harness : Multi-connector style. Includes : 9p and 10p Power cables, Main (out to CP) cable, Sound cable, and all coin door stuff (out to mechs, wired coin cointer, and wired service switch). All fully functional, uncut, no pulled pins, etc. (Can also be used on JR) - *SOLD*

Nintendo Sanyo EZ series video cable : 6p, long (upright) version. - *SOLD*


I will NOT sell seperate pieces of the main harness set. This is for the scratch builders, un-converters, and probably TG recordsetters :p
 

Attachments

  • FILE0281.jpg
    FILE0281.jpg
    92.2 KB · Views: 22
  • FILE0282.jpg
    FILE0282.jpg
    92.2 KB · Views: 18
  • FILE0285.jpg
    FILE0285.jpg
    95.3 KB · Views: 50
Last edited:
Got my Nin coin mech last night. Thing is beautiful, much nicer than expected. Thanks again, Ryan. Leaving you feedback now.
 
Back
Top Bottom