FS : Donkey Kong/Nintendo parts galore! Part Deux

ballytablewiz

Well-known member
Joined
Jun 11, 2010
Messages
2,246
Reaction score
140
Location
Arkham, Massachusetts
Rating - 100%
231   0   1
Doing some early Spring cleaning and decided to sell off some more of my Donkey Kong banana hoard. These parts were all acquired through various purchases and trades, no machines were harmed in their acquisition.

There is a TON of pics, so I will group items in separate replies to this post. All prices include shipping. (to the lower 48, overseas contact for quotes)

------------------------------------------------------------------------

First up is a NO COPYRIGHT bezel and marquee set. These are the early versions. In pretty good shape overall. Bezel has some typical wear in mounting spots and very light scratches. Marquee also has typical wear spots and a light scratch in the viewable area, barely visible in pics. Includes bottom bezel mounting bracket. FREE bonus : Cardboard monitor blind included.

*SOLD*
 

Attachments

  • FILE0783.jpg
    FILE0783.jpg
    95.6 KB · Views: 44
  • FILE0784.jpg
    FILE0784.jpg
    92.7 KB · Views: 35
  • FILE0785.jpg
    FILE0785.jpg
    91.3 KB · Views: 34
  • FILE0792.jpg
    FILE0792.jpg
    124.6 KB · Views: 36
  • FILE0794.jpg
    FILE0794.jpg
    127.9 KB · Views: 34
Last edited:
Donkey Kong sideart (1 side) - This was sold to me as NOS, but I believe it is Arcadeshop's or Arcade Renovations' version. In the pics you can see some discoloring of the wax paper covering, I think it was possibly exposed to some mild heat at some point, causing some of the wax on the protective layer to stick to the sideart sticker itself. My guess is that once installed, you could gently buff the wax off. I'm not going to end up using it, so maybe you'd like to try.

*SOLD*
 

Attachments

  • FILE0796.jpg
    FILE0796.jpg
    95.4 KB · Views: 15
  • FILE0797.jpg
    FILE0797.jpg
    93.8 KB · Views: 12
Last edited:
Donkey Kong bezel - This example has a problem : A cig burn in the viewable area! :( Typical wear spots in mounting area, a few light scratches, includes bottom bezel mounting bracket. I've tried to photo the cig burn, it's pretty heartbreaking to see it there. Maybe it can be buffed out or minimized to some degree, Novus might help.

*SOLD*
 

Attachments

  • FILE0803.jpg
    FILE0803.jpg
    98.4 KB · Views: 18
  • FILE0804.jpg
    FILE0804.jpg
    100.7 KB · Views: 15
  • FILE0805.jpg
    FILE0805.jpg
    102.1 KB · Views: 15
  • FILE0806.jpg
    FILE0806.jpg
    143.2 KB · Views: 13
  • FILE0808.jpg
    FILE0808.jpg
    101 KB · Views: 28
Last edited:
Donkey Kong Junior bezel - Pretty good shape overall. Typical wear in mounting spots, some light scratches, bottom bezel mounting bracket is included and getting a little rusty. I'd pull it off and repaint it if I was using it myself.

*SOLD*
 

Attachments

  • FILE0813.jpg
    FILE0813.jpg
    95.4 KB · Views: 10
  • FILE0815.jpg
    FILE0815.jpg
    139.3 KB · Views: 8
  • FILE0818.jpg
    FILE0818.jpg
    99 KB · Views: 6
  • FILE0819.jpg
    FILE0819.jpg
    107 KB · Views: 7
  • FILE0820.jpg
    FILE0820.jpg
    105.3 KB · Views: 5
Last edited:
Donkey Kong (& JR) multi-connector style wiring harness - Includes 9p power, 10p power, 7p power (for use with 4-board DK's), main control panel harness, and control panel harness (for actual CP side). All pins on CP harness are intact.

Does NOT include monitor and speaker cables. Mike's carries them (the only DK harness stuff they offer).

*SOME PENDING*
 

Attachments

  • FILE0825.jpg
    FILE0825.jpg
    98.1 KB · Views: 28
  • FILE0827.jpg
    FILE0827.jpg
    96.6 KB · Views: 27
Last edited:
Nintendo FCC edge connector/harness grab bag - Includes : Mario Bros. interconnect cable, Donkey Kong 3 interconnect cable with cage card-edge connector, 44p and 36p Nintendo VS interconnect cables, and a really minty P2 side Nintendo VS CP harness.

*SOLD*
 

Attachments

  • FILE0829.jpg
    FILE0829.jpg
    96.5 KB · Views: 20
  • FILE0832.jpg
    FILE0832.jpg
    98.7 KB · Views: 18
  • FILE0833.jpg
    FILE0833.jpg
    96.5 KB · Views: 15
  • FILE0834.jpg
    FILE0834.jpg
    96.5 KB · Views: 14
  • FILE0835.jpg
    FILE0835.jpg
    96.6 KB · Views: 14
Last edited:
Donkey Kong PCB - 2 board. This puppy has rock-solid original adjustment pots, all original heatsinks still in place, a shiny new Z80A CPU, new color PROMs, and more. Works 100%

*SOLD*
 

Attachments

  • FILE0837.jpg
    FILE0837.jpg
    96.5 KB · Views: 25
  • FILE0842.jpg
    FILE0842.jpg
    96.5 KB · Views: 18
  • FILE0762.jpg
    FILE0762.jpg
    87.9 KB · Views: 24
  • FILE0844.jpg
    FILE0844.jpg
    96.8 KB · Views: 16
  • FILE0839.jpg
    FILE0839.jpg
    96.1 KB · Views: 16
Last edited:
Sanyo EZ monitor vertical mounting bracket - You know what this is, and you know you need it :p

*SOLD*
 

Attachments

  • FILE0846.jpg
    FILE0846.jpg
    104.1 KB · Views: 14
  • FILE0847.jpg
    FILE0847.jpg
    100.5 KB · Views: 14
Last edited:
and some leftovers....

Nintendo cabinet metal mesh handle pulls - With original fasteners.

$8 SHIPPED

----------------------------------------------------------

DK-series control panel mount set - Includes main spacer plate, both side clasps, and all original fasteners.

$8 SHIPPED
----------------------------------------------------------

Nintendo cabinet bezel retainer bracket - Complete with original studs AND mounting plate with screws.

$14 SHIPPED
 

Attachments

  • FILE0235.jpg
    FILE0235.jpg
    107.8 KB · Views: 23
  • FILE0237.jpg
    FILE0237.jpg
    110.9 KB · Views: 26
  • FILE0239.jpg
    FILE0239.jpg
    113.3 KB · Views: 26
Last edited:
Not to nerd out here, but that's a cool variation on the no copyright bezel. The one I had was two pieces: one for the artwork (much thicker than the repro I have) with the art printed on the back; and one for the tinted plexi. Yours looks like a transition variation that's a hybrid between the new and the old.
 
I know you don't have one listed but any chance you have a Donkey Kong Joystick for sale also??

Great hoard, I wish I had the $$ for the PCB!!!
 
Not to nerd out here, but that's a cool variation on the no copyright bezel. The one I had was two pieces: one for the artwork (much thicker than the repro I have) with the art printed on the back; and one for the tinted plexi. Yours looks like a transition variation that's a hybrid between the new and the old.

I believe it to be exactly that - a transitional version. The early ones that are 2-piece I believe to be the first, probably used in Red cabs, then this second version was introduced, possibly around TKG3-UP Blue time. I prefer the one-piece version myself, and the no copyright ones are my personal favorites.



*All item stock has been updated, get yours while they're hot...
 
Friday *BUMP*
Items started shipping today - that could have been you!

I still offer a 10% loyalty discount to anyone I've done deals with in the past (and left feedback).
 
One last hurrah...

Prices slashed to move remaining items. I'll probably even lose a buck or two on a couple of these after I ship them to you!:eek:

Last call on the complete wiring harness before I split it up and scatter individual cables to the four winds (sell individually).
 
Back
Top Bottom