mhanlen1
New member
FS: Donkey Kong Cocktail (w/ DKII), Asteroids Upright (w/ HSS)- Eolia, MO
In anticipation of extra bills I need to pay by the middle of the month, I'm going to re-offer these. I'll also list them on Craigslist, but with slightly higher prices. Anyway, right now these are sitting in my garage, not being played. Asteroids currently has it's monitor out- because the cabinet was easier to move. If you're interested in the machine, I'll put it's monitor back in it and ready to play.
________________________________________________________________________________________________________________________
Donkey Kong Cocktail. I know it's "the cocktail" but it's still very enjoyable.
http://www.flickr.com/photos/mhanlen1/sets/72157618104807522/
-repainted
-Monitor and sound amp recapped entirely- even the filter cap
-original power supply entirely recapped
-CPU, CLK, and VID board recapped... i didn't recap the sound board as it looks like it was recapped in the past
-working and complete coin mech and coin box with new lock (and cool keychain)
-DKII and HS Save Kit Installed (had to replace z80 with a socket version)
-Replaced P2 joystick with original one
Everything on this machine works as it should. Monitor has no burn in- it's crisp and vibrant. It's very clean and gameroom ready. I'll also throw in a spare Sanyo chassis for parts, and some extra joystick rebuild parts. Has slight video glitch since I've owned it. Click HERE to see it. Does not effect gameplay and most people won't notice it. Asking $325 OBO.
________________________________________________________________
Next on the block. My Asteroids.
http://www.flickr.com/photos/mhanlen1/sets/72157623489836658/
-Installed HS Score Kit
-PCB swapped with a repaired one from forum member mrbill08
-New Big Blue and power supply fuses.
-Monitor recapped- filter caps also replaced- 4 transistors replaced via Bob Roberts Cap kit
-AR board recapped with new transistor too
-Coin Door Repainted, and fully working, bulbs replaced with LED's, with keychain and all new locks.
-4 brand new leg levelers
-new marquee bulb and new starter
-beautiful original control panel
-side art in good shape, with clear coat, some areas touched up with black paint
-repaired and repainted kick panel and corner.
-new T-molding
-new aluminum cones for p1 and p2 buttons.
Monitor has very light burn-in from Asteroids. You won't notice it when monitor is on. Other than some small issues with the artwork, this machine is in awesome shape. It plays great! Asking $300 OBO
Unless you see me on here, the best way to reach me is by phone. I only access the internet when I can find free wifi. If you don't mind waiting up to 2 days for a response, a PM is fine. My phone number is Eight Zero Three, Six Two Eight, Eight Nine Two One. I'm open to reasonable offers and absolutely will not part these machines out. I'd rather be late on my bills. Thanks for looking.
In anticipation of extra bills I need to pay by the middle of the month, I'm going to re-offer these. I'll also list them on Craigslist, but with slightly higher prices. Anyway, right now these are sitting in my garage, not being played. Asteroids currently has it's monitor out- because the cabinet was easier to move. If you're interested in the machine, I'll put it's monitor back in it and ready to play.
________________________________________________________________________________________________________________________
Donkey Kong Cocktail. I know it's "the cocktail" but it's still very enjoyable.
http://www.flickr.com/photos/mhanlen1/sets/72157618104807522/
-repainted
-Monitor and sound amp recapped entirely- even the filter cap
-original power supply entirely recapped
-CPU, CLK, and VID board recapped... i didn't recap the sound board as it looks like it was recapped in the past
-working and complete coin mech and coin box with new lock (and cool keychain)
-DKII and HS Save Kit Installed (had to replace z80 with a socket version)
-Replaced P2 joystick with original one
Everything on this machine works as it should. Monitor has no burn in- it's crisp and vibrant. It's very clean and gameroom ready. I'll also throw in a spare Sanyo chassis for parts, and some extra joystick rebuild parts. Has slight video glitch since I've owned it. Click HERE to see it. Does not effect gameplay and most people won't notice it. Asking $325 OBO.
________________________________________________________________
Next on the block. My Asteroids.
http://www.flickr.com/photos/mhanlen1/sets/72157623489836658/
-Installed HS Score Kit
-PCB swapped with a repaired one from forum member mrbill08
-New Big Blue and power supply fuses.
-Monitor recapped- filter caps also replaced- 4 transistors replaced via Bob Roberts Cap kit
-AR board recapped with new transistor too
-Coin Door Repainted, and fully working, bulbs replaced with LED's, with keychain and all new locks.
-4 brand new leg levelers
-new marquee bulb and new starter
-beautiful original control panel
-side art in good shape, with clear coat, some areas touched up with black paint
-repaired and repainted kick panel and corner.
-new T-molding
-new aluminum cones for p1 and p2 buttons.
Monitor has very light burn-in from Asteroids. You won't notice it when monitor is on. Other than some small issues with the artwork, this machine is in awesome shape. It plays great! Asking $300 OBO
Unless you see me on here, the best way to reach me is by phone. I only access the internet when I can find free wifi. If you don't mind waiting up to 2 days for a response, a PM is fine. My phone number is Eight Zero Three, Six Two Eight, Eight Nine Two One. I'm open to reasonable offers and absolutely will not part these machines out. I'd rather be late on my bills. Thanks for looking.