FS: DK3 Kit, Mr. Do's Castle, Williams Cab

Grbgemen

Active member
Joined
Mar 12, 2008
Messages
1,167
Reaction score
8
Location
Lincoln, Nebraska
Rating - 100%
33   0   0
Got the following for sale:

Donkey Kong 3 Kit(partial) - ebay now
- Working boardset
- Control panel (unpopulated. nice condition w/few bad spots on front edge)
- Marquee (good condition w/some light scratches. Some marks near bottom where sat in marquee bracket)
- Bezel (good condition w/some light scracthes. mainly towards bottom. one small scrape)

Mr. Do's Castle - SOLD!
- Working

Williams Moon Patrol Cabinet - SOLD!
- Solid cabinet with some chipping around bottom. Converted to Cadash. PCB is gone. No PSU. Jamma wired. Monitor works with nice picture. Sides painted black. Stripped small section to see if artwork was salvageable and MP artwork is underneath. Tried a different stripper and it went down to bare wood. After looking closer, it had been previously sanded so it was not salvageable anyway.

Pictures coming in a little bit. Camera battery is charging.
 
Last edited:
Williams Cabinet Pics:
http://s23.photobucket.com/albums/b391/tjkurtz/moon/

These pics are before i used the other stripper. you can see the sand marks where someone previously sanded it before painting it black. Think they also filled in quite a few spots with some type of filler.

DK3 Pics:
http://s23.photobucket.com/albums/b391/tjkurtz/DK3/

The bezel is actually in very good condition. Besides the small scrape, the scratches are mainly surface scratches. I thought the marquee was scratched but it looks like it is cracked just a tiny bit. It would be just above the lower marquee bracket. I tried to get a good picture but its hard to see. Not as bad as it sounds and is hard to see when installed.
 
Back
Top Bottom