FS Parts: FS: Crowns Golf PCB, not working (but signs of life)

joemagiera

Thread Manager
Joined
Mar 22, 2003
Messages
6,162
Reaction score
1,073
Rating - 100%
108   0   0
emails only, [email protected]

Offering a tested/NOT WORKING Crowns Golf 2-board PCB stack boardset.

This boardset has been tested and is NOT working. The edge connectors on both boards and both ribbon cables are in excellent condition. When I tested this boardset, it does show signs of life. It boots up and goes through attract mode but obviously there are problems. While the screen displayed in the attached pictures pretty much only shows blue, there are instances in the boot up where all three colors are shown nice and bright, but it's only for a split second. I tried several times, but could never capture all the colors showing in a picture. Boards are pretty clean and I do not see any obvious physical damage. The soldered-in on-board battery has been removed and discarded. Who knows, might be one of those games where it needs the battery to boot properly (ha, very doubtful).

I checked the ROMs and as best I can determine, MAME calls this "Crowns Golf (834-5419030)".

The JAMMA adapter is NOT included.

You are welcome to come see/try it at my house.

Asking $49 shipped.

emails only, [email protected]
 

Attachments

  • P1040435.JPG
    P1040435.JPG
    548.5 KB · Views: 4
  • P1040436.JPG
    P1040436.JPG
    618.7 KB · Views: 4
  • P1040437.JPG
    P1040437.JPG
    826.1 KB · Views: 4
  • P1040438.JPG
    P1040438.JPG
    751.9 KB · Views: 2
Back
Top Bottom