shardian
New member
I've been screwing with this game for a few weeks now, and I am frikking tired of it!
Good news:
- it is complete with an additional 'spare parts' set of boards.
-I have repinned the power connectors, replaced the switcher, and dealt with wiring issues. Power appears to be fine now.
-Game has been completely disassembled and everything thoroughly cleaned
- Monitor works.
- cabinet has original gray vinyl in surprisingly good condition.
Bad News:
- The boards are all over the place in regards to working status. It will go from booting and in attract mode, to not doing shit. Currently it will go through all of the self test screens, but will not boot into the actual game.
- Rotary controller does not appear to register in game, but that may just be a board issue. I can tell you the optic board has been repaired...badly.
- The cabinet needs a bit of work. the front panel is swollen and needs replaced. The sides are fine, but the dowel connections have started to separate. The game needs to be clamped and reglued once a front panel is made.
Show up with $150, and it is yours. If noone claims it within 2 weeks, I will part it out. I would hate to do that, but that's life huh? That's how sick of this machine I am.
I'll also consider trades. I need a working 19" K7000 medium res monitor chassis badly... very badly. Have a crappy working 100% jamma cab you want to offload? I'd consider it...but I ain't driving for it. Cash is preferred.
Pictures and further discussion located here:
http://forums.arcade-museum.com/showthread.php?t=105932
Good news:
- it is complete with an additional 'spare parts' set of boards.
-I have repinned the power connectors, replaced the switcher, and dealt with wiring issues. Power appears to be fine now.
-Game has been completely disassembled and everything thoroughly cleaned
- Monitor works.
- cabinet has original gray vinyl in surprisingly good condition.
Bad News:
- The boards are all over the place in regards to working status. It will go from booting and in attract mode, to not doing shit. Currently it will go through all of the self test screens, but will not boot into the actual game.
- Rotary controller does not appear to register in game, but that may just be a board issue. I can tell you the optic board has been repaired...badly.
- The cabinet needs a bit of work. the front panel is swollen and needs replaced. The sides are fine, but the dowel connections have started to separate. The game needs to be clamped and reglued once a front panel is made.
Show up with $150, and it is yours. If noone claims it within 2 weeks, I will part it out. I would hate to do that, but that's life huh? That's how sick of this machine I am.
I'll also consider trades. I need a working 19" K7000 medium res monitor chassis badly... very badly. Have a crappy working 100% jamma cab you want to offload? I'd consider it...but I ain't driving for it. Cash is preferred.
Pictures and further discussion located here:
http://forums.arcade-museum.com/showthread.php?t=105932
Last edited: