FS: Clay’s Williams Multigame

alejandromad

New member

Donor 2011
Joined
Apr 28, 2009
Messages
3,048
Reaction score
18
Location
Las Vegas, Nevada
Rating - 100%
174   0   0
SOLD!

... shipped in lower 48

You all know what it is. If you don't, you can read up on it here:
http://multigame.com/williams.html

It's the complete kit, including the JAMMA cardedge connector (if you would like to use a JAMMA harness).

I have never used this. The 2 eproms have been programmed but it was never verified by me, since I didn't put a cabinet together. If the buyer requests, I can program them again before sending.

Without further ado, the pictures...
 

Attachments

  • multiwilliams_cpu_expansion.jpg
    multiwilliams_cpu_expansion.jpg
    89.2 KB · Views: 46
  • multiwilliams_io_widget.jpg
    multiwilliams_io_widget.jpg
    95.7 KB · Views: 36
  • multiwilliams_sound.jpg
    multiwilliams_sound.jpg
    85.3 KB · Views: 30
  • multiwilliams_pcbs.jpg
    multiwilliams_pcbs.jpg
    86.7 KB · Views: 37
  • multiwilliams_jamma_fingerboard.jpg
    multiwilliams_jamma_fingerboard.jpg
    89.8 KB · Views: 26
Last edited:
The responses below are from the page at http://multigame.com/williams.html

Robotron, Defender, Joust, Stargate, Bubbles and Splat!

The kit is designed to be installed on a Robotron or Joust CPU board.

The Williams Multigame kit will ship with a DOS-based PC application that will assemble a set of ROM images to be programmed onto a 27C040 and 27C256 EPROM. ROM images can be obtained from your own ROM boards, or the internet as long as you have a legal right to do so. Detailed instructions are included.

As I stated in the first post... the EPROMs are already programmed.
 
Back
Top Bottom