FS Chicago area 6 games + some parts

Sam Zehr

New member
Joined
Jul 22, 2006
Messages
31
Reaction score
0
Location
Crete, Illinois
Rating - 100%
2   0   0
FS Chicago area Frogger, Breakout, Baby Pac, Dolly Parton

Hi guys

Out of space - getting rid of a bunch of arcade stuff

Going to eBay if not sold by Saturday

Located in Crete, IL - 30 miles south of downtown Chicago

There is someone coming from Minneapolis to Chicago to pick up a game that could assist with delivery along that route - email me for details

I cannot deliver - SUV blew up this summer.

Email is better for me than PM samzehr NO@SPAM comcast.net

Cabinet buyers get first dibs on extra parts, but make me an offer in case they don't take them.

Frogger - $300
http://www.athyriogames.com/games/frog_2550.JPG
http://www.athyriogames.com/games/frog_2551.JPG
http://www.athyriogames.com/games/frog_2552.JPG
http://www.athyriogames.com/games/frog_2553.JPG
http://www.athyriogames.com/games/frog_2554.JPG
http://www.athyriogames.com/games/frog_2555.JPG
http://www.athyriogames.com/games/frog_2556.JPG
http://www.athyriogames.com/games/frog_2557.JPG
http://www.athyriogames.com/games/frog_2558.JPG
http://www.athyriogames.com/games/frog_2559.JPG
http://www.athyriogames.com/games/frog_2560.JPG
http://www.athyriogames.com/games/frog_2561.JPG
http://www.athyriogames.com/games/frog_2562.JPG
http://www.athyriogames.com/games/frog_2563.JPG
http://www.athyriogames.com/games/frog_2564.JPG
http://www.athyriogames.com/games/frog_2565.JPG
http://www.athyriogames.com/games/frog_2566.JPG
http://www.athyriogames.com/games/frog_2567.JPG
This was my attempt to take a completely gutted cabinet and build a game
Turned out very well, although my colormatching could be better
Cabinet cleaned, sanded inside, filled
My brown paint looks better in normal arcade lighting than the pictures, but this is
probably a game to go on the inside of a bank of games :)
Coin door, control panel, cabinet hardware sandblasted and powdercoated
Repro CPO, repro cardboard bezel, new plexiglass, new buttons and stick, new t-molding
Added power switch inside coin door for easy access
Wired with switcher
Free play roms installed
Little ROM board added with jumper for super easy/regular mode - made when my son was 4
Extra motherboard - plugged it in and it works
Brand new monitor

Breakout - $300
http://www.athyriogames.com/games/breakout_2443.JPG
http://www.athyriogames.com/games/breakout_2444.JPG
http://www.athyriogames.com/games/breakout_2445.JPG
http://www.athyriogames.com/games/breakout_2446.JPG
http://www.athyriogames.com/games/breakout_2447.JPG
http://www.athyriogames.com/games/breakout_2448.JPG
Extra 19" working B&W monitor
Restored - disassembled, cleaned, sandblasted and powdercoated when possible
Clean enough inside to eat off of
Bezel had a few cigarette burns - I cleaned it up as best I could
Coin switches not bolted in - I was trying to figure out a way to hook the to the rejects

Baby-Pac Man
$600 for Baby Pac + extra parts
$500 for only Baby Pac
http://www.athyriogames.com/pins/babypac2614.JPG
http://www.athyriogames.com/pins/babypac2615.JPG
http://www.athyriogames.com/pins/babypac2616.JPG
http://www.athyriogames.com/pins/babypac2617.JPG
http://www.athyriogames.com/pins/babypac2618.JPG
http://www.athyriogames.com/pins/babypac2619.JPG
http://www.athyriogames.com/pins/babypac2620.JPG
http://www.athyriogames.com/pins/babypac2621.JPG
http://www.athyriogames.com/pins/babypac2625.JPG
http://www.athyriogames.com/pins/babypac2626.JPG
http://www.athyriogames.com/pins/babypac2627.JPG
http://www.athyriogames.com/pins/babypac2628.JPG
http://www.athyriogames.com/pins/babypac2629.JPG
http://www.athyriogames.com/pins/babypac2630.JPG
http://www.athyriogames.com/pins/babypac2631.JPG
http://www.athyriogames.com/pins/pin2603.JPG
Working great, I think even all no lights burned out. Monitor looks funny in a few pics due to refresh, and because it is vertically mounted - it works 100%.
Control panel disassembled, sandblasted, powdercoated, and reassembled with repro CPO and new buttons. I've had it for four years with no problems.
MPU battery removed, replaced with coin cell and diode
Extra parts:
2 VIDIOT boards - I don't remember testing them, but assume nonworking
2 Solenoid/Lamp boards
3 extra conrol panels
1 extra monitor glass - some flake
Extra playfield - amateur retouch and clear coat
Extra playfield parts - most tumbled and reassembled
Set of repro drop targets
Set of decals I made before I found out about repro drop targets
Extra drop target assembly

Dolly Parton - $450
http://www.athyriogames.com/pins/dolly2572.JPG
http://www.athyriogames.com/pins/dolly2573.JPG
http://www.athyriogames.com/pins/dolly2574.JPG
http://www.athyriogames.com/pins/dolly2575.JPG
http://www.athyriogames.com/pins/dolly2576.JPG
http://www.athyriogames.com/pins/dolly2577.JPG
http://www.athyriogames.com/pins/dolly2578.JPG
http://www.athyriogames.com/pins/dolly2579.JPG
http://www.athyriogames.com/pins/dp1.jpg
http://www.athyriogames.com/pins/dp2.jpg
http://www.athyriogames.com/pins/dp3.jpg
http://www.athyriogames.com/pins/dp4.jpg
http://www.athyriogames.com/pins/dp5.jpg
Works great, very clean MPU - battery removed, coin cell and diode mod.
I've had this since college, no problems, backglass is great
Only issues are playfield wear, and the bumper lights don't last very long
Comes with promo 45 - although the 45 is cracked, probably can't play it, but cool for display.

Mr. Do/Universal lot - $75 + $25 shipping
http://www.athyriogames.com/games/do2634.JPG
http://www.athyriogames.com/games/do2635.JPG
http://www.athyriogames.com/games/do2636.JPG
http://www.athyriogames.com/games/do2637.JPG
http://www.athyriogames.com/games/do2638.JPG
http://www.athyriogames.com/games/do2639.JPG
NOS Mr. Do sideart
NOS Mr. Do's Castle sideart
Untested boards, selling as labled:
Mr. Do's Castle
Do-Run-Run!
Mr. Do's Wild Ride
Ladybug
I think Ladybug - maybe one of these is a boot?

Road Riot 4WD - $75 + $25 shipping
http://www.athyriogames.com/games/rr42640.JPG
http://www.athyriogames.com/games/rr42641.JPG
http://www.athyriogames.com/games/rr4wd_2490.JPG
Got this off eBay years ago, still in the box it came in.
My JAMMA test only has power and video - board came up fine

Monitors and stuff:
Pickup only, I could take to the UPS store for pack and ship, but they always charge an
extra $20 or so to pack plus the shipping cost. Figure $50 a piece to ship, I'll refund the
difference if less.

13" Samsung tube and frame - $10
line new - got it without chassis

13" Tube - $5
No burn
LG Phillips A34KPU02XX

19" Electrohome - $15
Pulled and tested a few years ago, sitting since
Bad Rally-X burn - marked 'OK, needs cap kit' - good test bench monitor

Black and whites, tested this week:
19" 19v1001 - $10
Working
Has orange, blue, green, and red overlays attached

19" 19v1001 - $5
A bit wavy, some vertical fold - needs cap kit, but works

23" b&w - $5
Got a picture, contrast poor - maybe can adjust out?

23" B&W - FREE
HV glow on tube, no picture.

Thanks
Sam
 
Last edited:
Back
Top Bottom