Bullwinkle
Member
FS: Chexx Hockey in NH -- but can deliver as far south as Lagrangeville, NY
I have an original ICE Chexx Hockey. All gears work great (many are new), replaced all player washers and some of the players too including goalies. Replaced one of 2 goalie rods. Installed brand new ice surface last month. The puck flies! USA vs Russia, PCB is v1 and is solid and error free as is the scoreboard. To bulletproof her, I installed a more powerful cooling fan inside the scoreboard and ran a separate power transformer to it so it does not draw from the control board in the scoreboard. (The scoreboards are notorious for overheating and getting flaky when the fan doesn't push enough air. Since I've put the new fan in, I can leave it on all day without issue and have never had an issue with it since.) I've made a quick disconnect for the power line going to the fan so the top can be removed without any trouble. I installed an outlet into the base inside to plug the 12vdc power supply into so you only have 1 power cord coming out of the machine. I wired it in after the switch so the fan and game turn off when the switch goes off. The Gameplay is great! Sound is 100% (yes the boo buttons work too). The dome has typical scratches but you don't notice them when playing and it has never bothered me enough to replace it at $315 +shipping. The only "crack" is down by the bolts and its more of a "piece missing" than a crack. (see first pic behind the goalie on the right) It does not affect gameplay and the puck can not escape the playfield as it's only on the part of the dome that flairs out for the mounting bolts. Has the original blue base. I do have a bag of spare parts, washers and a new chexx decal for the side (was going to strip and apply new decal at some point.), the PCB door could use some love (needs a good sanding and repainting).
I am driving to Lagrangeville, NY on Saturday and can deliver it if it's on route. asking $950
I have an original ICE Chexx Hockey. All gears work great (many are new), replaced all player washers and some of the players too including goalies. Replaced one of 2 goalie rods. Installed brand new ice surface last month. The puck flies! USA vs Russia, PCB is v1 and is solid and error free as is the scoreboard. To bulletproof her, I installed a more powerful cooling fan inside the scoreboard and ran a separate power transformer to it so it does not draw from the control board in the scoreboard. (The scoreboards are notorious for overheating and getting flaky when the fan doesn't push enough air. Since I've put the new fan in, I can leave it on all day without issue and have never had an issue with it since.) I've made a quick disconnect for the power line going to the fan so the top can be removed without any trouble. I installed an outlet into the base inside to plug the 12vdc power supply into so you only have 1 power cord coming out of the machine. I wired it in after the switch so the fan and game turn off when the switch goes off. The Gameplay is great! Sound is 100% (yes the boo buttons work too). The dome has typical scratches but you don't notice them when playing and it has never bothered me enough to replace it at $315 +shipping. The only "crack" is down by the bolts and its more of a "piece missing" than a crack. (see first pic behind the goalie on the right) It does not affect gameplay and the puck can not escape the playfield as it's only on the part of the dome that flairs out for the mounting bolts. Has the original blue base. I do have a bag of spare parts, washers and a new chexx decal for the side (was going to strip and apply new decal at some point.), the PCB door could use some love (needs a good sanding and repainting).
I am driving to Lagrangeville, NY on Saturday and can deliver it if it's on route. asking $950

