FS: Capcom Street Fighter II Champion Edition Jamma PCB, Manual, Side Art ++++

john2654

Well-known member

Donor 3 years: 2011, 2020, 2024
Joined
Mar 30, 2010
Messages
6,426
Reaction score
1,272
Location
Rhinelander, Wisconsin
Rating - 100%
77   0   0
FS: Capcom Street Fighter II Champion Edition Jamma PCB, Manual, Side Art ++++

SOLD!!


Street Fighter II Champion Edition Jamma PCB

Tested and works fine.

Auction includes:

* SFII CE PCB
* 2 NOS Side Art Stickers
* 2 SFII Info Sheets
* SFII NOS Player Info Sticker
* Manual
* Also including the monitor surround (not pictured)

These come from a perfectly working arcade conversion that was never finished. Decided to turn it back to the original game.

**I do also have the marquee, but I am keeping it until I can find a replacements... or if your offer for it is acceptable.

$(KGrHqYOKpsE6TDSLZGKBOrb98jHYw~~60_3.JPG

$(KGrHqQOKjoE6WIlI-w,BOrb9+h4m!~~60_3.JPG

$(KGrHqQOKpsE6TSTl323BOrb-BNfew~~60_3.JPG

$(KGrHqQOKocE5s9Ypg2UBOrb9+zL+w~~60_3.JPG
 
Last edited:
Please no more, "will you sell just the side art" PMs.

This is a kit and it will stay that way.

Thanks!
 
I am not sure if this board will run Ghouls 'n Ghosts. Some of these models did. It was just a matter of swapping some ROM chips. I thought that the board versions were B & C. I will have to check on which version this is.
 
Heh, unlike some other members, I actually want to play some CE. :D

If I was looking for a GHOULS boot, then I'd PM Mitsurugi-w. The guy has a LOT of CAPCOM boards.

I'm sure he has a GHOULS boot board hanging around somewhere--for a KLOVer.
 
If he backs out I'll get it.
I've got a CE cab that had Alpha3 in it I want to convert back to CE.
PM sent with info in case of nonpayment

-FrankCastleAZ
 
Does any one know where the instuction cards and move strip is supposed to be displayed on a dedicated SF2CE cabinet? Or are these supposed to be used for conversions? I never saw these on any of the SF2CE machines I played at the arcade.
 
Does any one know where the instuction cards and move strip is supposed to be displayed on a dedicated SF2CE cabinet? Or are these supposed to be used for conversions? I never saw these on any of the SF2CE machines I played at the arcade.

I usually see move strips positioned, under the glass, either just above or below the monitor; however, usually below the monitor. Sometimes I see it placed on the JP CP too.

P1010883.jpg

images


http://t0.gstatic.com/images?q=tbn:...m6-dZ_pSYb_nExjoHXWCrN3Es17inTsipToPTQp0Nse8w
http://pic100.picturetrail.com/VOL1102/3826519/8068073/264941624.jpg
 
I know, but a dedicated SF2CE cab with the original bezel shouldn't have the move strip in that area. It would just block the art on the bezel and wouldn't look right. Any other Ideas?
 
Back
Top Bottom