FS : Busticated Donkey Kong 4-Board

ballytablewiz

Well-known member
Joined
Jun 11, 2010
Messages
2,246
Reaction score
140
Location
Arkham, Massachusetts
Rating - 100%
231   0   1
It's a TKG3-06 boardset, with soldered CPU.

SND board works but has no Kong stomp sound.

Smaller cable on SND board is missing, other is known good.

8035 MPU is known good.

Both pots are broken off the CLK board, one is missing completely, the other hanging.

Ribbon cables are all visually ok and presumed good.

When it was populated with known good romset (and quick-rigged pots), board displayed binary garbage, leading me to believe bad RAM or CPU. Since the CPU is not socketed, that's as far as I went.

Any and all ROM chips present are known bad.

Metal backing plate is nice, no significant rust.

Great for parts scabbing to revive other boards, individual board swapping (TKG3-06 and TKG3-07 series have been found to be interchangeable by me, at least CLK and SND boards), or just revive this board (might be as simple as new cpu, pots, and populate).
________________________________________________________

$13 + $12 shipping (US) = $25 TOTAL ***SALE PENDING***

Money Order only, no PayPal available.
 

Attachments

  • FILE0380.jpg
    FILE0380.jpg
    94.4 KB · Views: 30
  • FILE0381.jpg
    FILE0381.jpg
    94.8 KB · Views: 25
Last edited:
que?

Quite the contrary, my good man. This board is all that's left over from my flurry of elementary DK boardset repairs (which I made out on quite well, thank you.) And it is still very much a valid board in the hands of a more technical repairman - which is where it's going ;) No chumps here.
I believe that the word you were looking for was "chumpatized"...
 
mrawesome.jpg


...free bump
 
Back
Top Bottom