FS: AVP Manual, Tekken 1 and 3 control panels, 19" monitor bezel

Broodwich

Well-known member

Donor 6 years: 2012-2013, 2015, 2020, 2023-2024
Joined
Feb 20, 2011
Messages
9,846
Reaction score
420
Location
Albany, New York
Rating - 100%
140   0   0
FS: AVP Manual, Tekken 1 and 3 control panels, 19" monitor bezel

I have a few Parts / Items for sale. Prices are negotiable and all offers will be considered, prices DO NOT include shipping. I fully welcome Pick ups and will travel up to 30 miles if needed. I also welcome trades or credit towards the items wanted in my signature. Please include 10% to cover paypal fee's in your payment or Gifted payment please.

Jamma Boards:
-Mortal Kombat 2 - MK2- Rev 3.1, Tested Working, No sound (needs sound board) $70
-Mortal Kombat - MK1- Rev 3.0 Tested Working, With Sound board, needs cables. $60

-NBA Jam TE Sound Board - Tested working $25 (board only no cables)
-ShuffleShot - tested working, with marquee and manuals, needs cmos battery. MMAO

Misc:
- Capcom CPS2 Alien Vs. Predator Manual $8
- Tekken 1 Control Panel - Has character move card, might be an overlay (namco TK40-03329-00), was originally cut for 5 buttons, no buttons or sticks, with plexi (most likely a MK1 CP). $50
- (2) CPS2 fully loaded 3/4p kick harnesses (about 5 feet of wire each) $15 each
- Mortal Kombat 3 Kit Manual $8
- Golden Tee 3D Manual $5
- Midway Touch Master Infinity Manual $5
- Random Midway Touch Master DVB Blanking Plate P/N 03-9515-1 (i think this is the plastic plate that fills the bill acceptor if you don't have one) Make Offer.
-"SuperGun" Jamma to Scart/CRT/ect -(used 2 hours total) $50
-(2)Original NBA Jam & TE/Mortal Kombat 1&2/Smash TV ect.. soundboard ribbon cables- $4 each
-(3) 18" Ribbon cables for above midway games- $6 each
-Street Fighter 2 player2 control panel stickers -Black and yellow theme, $10

Sega Naomi 18 Wheeler Cabinet Parts! http://forums.arcade-museum.com/showthread.php?t=196811

I've got a couple bare coin doors both from midway games (1 from mortal kombat 1 without the frame and just the top door, and another from 18 wheeler that is complete minus the mech's and bezels) PM Me for pictures or if interested. looking for $20 for the one from 18 wheeler and $10 for the one from MK1 (+Shipping).

Photobucket link to pictures: http://smg.photobucket.com/albums/v218/nismo240sx1/For Sale/

Wanted Trade Items: KI 1 or 2 dedicated Control panel (not the overlay, the wooden panel itself, conversion panel is also an option if in good condition). MK3 PCB, 25" polo or K7000 complete working tube and chassis, Tekken Tag PCB and Tekken 4 PCB (with kick harness). Cabinets: Killer Instinct, Total Carnage, Rampage World Tour, Mortal Kombat 3, Smash TV, MK2/NBA Jam style cabinet.

I accept paypal only! feel free to email me or PM questions or picture requests. I have more parts that i will add to this post or start a new one i just have to find them first :D

Thanks for looking!
 

Attachments

  • AVP Manual.jpg
    AVP Manual.jpg
    96.8 KB · Views: 21
  • Tekken 1 Control Panel Front.jpg
    Tekken 1 Control Panel Front.jpg
    98.2 KB · Views: 188
  • Tekken 1 Control Panel Back.jpg
    Tekken 1 Control Panel Back.jpg
    97.2 KB · Views: 82
  • Mortal Kombat 3 Manual.jpg
    Mortal Kombat 3 Manual.jpg
    98.8 KB · Views: 24
  • CPS2 4 player harness 2.jpg
    CPS2 4 player harness 2.jpg
    106.4 KB · Views: 37
Last edited:
I have an AVP marquee available if anyone is interested. Plexi. Good shape.

FREE BUMP!

i think i have one of those also, just gotta find it :D thanks for the bump! there's a couple different sizes i have/had 2 one wasn't as tall as the other.
 

Attachments

  • SuperGun2.jpg
    SuperGun2.jpg
    101.9 KB · Views: 32
  • SF2 P2 Stickers.JPG
    SF2 P2 Stickers.JPG
    97.9 KB · Views: 14
  • MK1.jpg
    MK1.jpg
    100.9 KB · Views: 3
  • MK2.jpg
    MK2.jpg
    103 KB · Views: 3
  • NBA JAM TE SB.jpg
    NBA JAM TE SB.jpg
    102 KB · Views: 2
Last edited:
sale pending on Tekken 3 CP to ijij
 

Attachments

  • photo 1.jpg
    photo 1.jpg
    93.3 KB · Views: 3
Last edited:
Bump! still got a few items!

i also found a pair of Coin Counters if anyones looking for them.
 
the Tekken 1 CP is originally MK? how much with shipping to 33565? thanks Mick

15$ via fedex the panel is just over 26.5" wide 13.5" long with t-molding and 1" tall @ 9lbs (size of a huge baby lol). as for if it's a MK CP originally i cannot say, tho it could be cause it is the right colors and was originally cut for 5 holes as you can see by the pic (the bottom middle holes being added later by Namco Arcade), it does however look like there could be another CP under the purple namco background i can't tell tho because there's only 1 spot where the overlay is peeling about 4mm or 1/5th of an inch in the upper right corner and some residue is covering up the hard metal or plastic that's laminated to the wood.

also i'm looking at it more closely now and the plexiglass isn't cut very well the bottom is a very rough cut, not a huge deal but someone who wants the panel perfect might want to replace it and i figured i'd add that lil info in now.

there is a sliver of the original cp overlay under the NAMCO CP overlay that i can see red... (donno if that helps or makes things worse)
 
u guys have me wondering, reguardless it's for sale :D

Check this out:
1115577292.jpg

attachment.php


99% positive. What is under the crappy overlay?
 
Check this out:


99% positive. What is under the crappy overlay?

i'm pretty sure u guys are right, i leave it up to the buyer to remove it tho (i wouldn't want to botch it up), kinda sucks because regardless there's an extra hole drilled on each side >.< . the panel is plywood but there's definitely a reddish black metal panel that the purple overlay is stuck to :D
 
i'm pretty sure u guys are right, i leave it up to the buyer to remove it tho (i wouldn't want to botch it up), kinda sucks because regardless there's an extra hole drilled on each side >.< . the panel is plywood but there's definitely a reddish black metal panel that the purple overlay is stuck to :D

Well you can go two ways with that hole, plug it with one of these:

http://www.lizardlick.com/Happ-Hole-Plug_p_84.html

Or fill the hole with wood and put on a new control panel overlay.
 
Bump!

I've also got (2) CPS2 fully loaded 4p kick harnesses and (1) MK3 Kit manual for sale.


I'm looking for: 25" Monitor bezel (heavy black plastic version), umk3/mk3 Bezel (moves list/fatalities ect), NBA Jam or Marvel Vs. Capcom Manual, and i need about 100 ft. of 20gauge wire (for kick harness extensions). i'd be willing to work out some trades for these.
 
Last edited:
How much? I have a friend in Albany that would love one.

i'd like 125$ for it, i'm pretty sure i paid atleast that much, i haven't tried to use it in years since i never had the right monitor/tv/scart adapter. it's still in it's original box hasn't had more than 2 hours of use on it. i'm attaching images they speak louder than words.
 

Attachments

  • SuperGun2.jpg
    SuperGun2.jpg
    101.9 KB · Views: 10
Back
Top Bottom