Takeman
Well-known member
Restoring a classic Atari game? Does it have a nasty ol'power brick that need some love?
Im running reproduction Atari Power Brick panels.
Heres the deal. Panels are die punched and yellow zinc coated like the originals. All you need to do is swap over your existing parts. To make that easier, I've compiled a parts kit that includes all the mounting hardware to replace worn, missing or rusty originals. The fuse decals are included for free with each panel purchased. The decals are on a metalic vinyl & plotter cut by Rich @ This Old Game.
Panels are $26 each in QTY 1-3
Panels in QTY of 4 or more are $24
Shipping for up to 3 in a USPS flat Rate box is $15 - USA 48
Add $2 for each additional panel. No additional shipping on part kits.
$12 Hardware Parts (HDW) kit includes:
10 - 1/4 female quick disconnects
1- AGC single fuse holder - 1/4" quick disocnnect
12 - white zip ties
10 - 8-32 k-loc nuts
1 - 10-32 k-loc nut
4 - 8-23 x 4" bolts
2 - 8-32 x 3/4" bolts
1 - 10-32 x 3/4" bolt
8 - #8 nylon washers
1 - 2" big blue clamp
3 - 8-32 1/4" screws
4 - 6-32 1/2 screws
8 - #8 washers
1 - plastic grommet (same as original atari part)
(66 pcs)
Add Ons
$7 - 5 Position Fuse Holder 1/4" quick disconnect
$4 - Rectifier Bridge
$8 - Big Blue - NOS made in 1999 (These are in good shape and I have them in all my games)
$29 - DLX Parts Kit - Everything in the hardware parts kit plus all add ons.
Fuse label is included for free for each panel.
I have enough part kits for 25 or so. If sold out, it may take a little extra time to get more parts. As soon as it get close to being sold out (if it does), I'll start ordering more so that there is no delay.
Paypal payments to [email protected] Be sure you put your KLOV name in the comments and what payment is for. Dont forget your contact info
1. Project (ie Power Brick panel, Parts kit - please specify )
2. KlOV Alias
3. Name & Shipping address
4. Email address
From the time I say go, expect 3-4 weeks. I am going to run enough for everyone who prepays before the deadline. I will update on a regular basis.
I'll give the pre-order until October 1st @ 6pm Central time. After the 1st, the panel will go up if* there are any left over. If there is not enough interest to get this done, I'll refund all monies. Judging by the interest list, this should be no problem.
Paid List
-------------------------
Joeb1355 x3 panels, x1 DLX , x1 HDW - SHIPPED
Chris25810 x1 panel - SHIPPED
Zud x2 panels, x2 DLX - SHIPPED
Bheineck x6 panels, x6 DLX- SHIPPED
Markh x2 panels , x2 DLX - Ready for Pick Up
MrBill08 x3 panels, x3 HDW - Picked Up
Kspiff x7 panels, x7 DLX minus big blue - SHIPPED
MNRocketry x2 - SHIPPED
Cloggans x8 , 4 HDW- SHIPPED
Joeycuda x4 panels - SHIPPED
Mycroft x4 panels, 4HDW- SHIPPED
Jimk x2 panels, 2HDW- SHIPPED
Arcadium x3 panels - SHIPPED
Raj x1 panel - SHIPPED
Tronic x6 panels, 4HDW - Picked Up
Docfrankie x2 panels , 2HDW - SHIPPED
Roadrunner000 x4 panels 4DLX - SHIPPED
Gregbl x5 panels, 5DLX - Ready for Pick Up - email sent -
Brokent0ken x5 panels, 5DLX minus big blue- SHIPPED
Mort x2 panels, 2DLX - SHIPPED
MXracer x1 panel, 1 DLX - Ready for Pick Up
Phetishboy x1panel, 1 DLX minus fuse hldr - SHIPPED
Dezbaz 1 , 1DLX - SHIPPED
Seawolf 6, 6DLX - Ready for Pick UP
-------------------------
Panels 84 / DLX 41 / HDW 20
Im running reproduction Atari Power Brick panels.
Heres the deal. Panels are die punched and yellow zinc coated like the originals. All you need to do is swap over your existing parts. To make that easier, I've compiled a parts kit that includes all the mounting hardware to replace worn, missing or rusty originals. The fuse decals are included for free with each panel purchased. The decals are on a metalic vinyl & plotter cut by Rich @ This Old Game.
Panels are $26 each in QTY 1-3
Panels in QTY of 4 or more are $24
Shipping for up to 3 in a USPS flat Rate box is $15 - USA 48
Add $2 for each additional panel. No additional shipping on part kits.
$12 Hardware Parts (HDW) kit includes:
10 - 1/4 female quick disconnects
1- AGC single fuse holder - 1/4" quick disocnnect
12 - white zip ties
10 - 8-32 k-loc nuts
1 - 10-32 k-loc nut
4 - 8-23 x 4" bolts
2 - 8-32 x 3/4" bolts
1 - 10-32 x 3/4" bolt
8 - #8 nylon washers
1 - 2" big blue clamp
3 - 8-32 1/4" screws
4 - 6-32 1/2 screws
8 - #8 washers
1 - plastic grommet (same as original atari part)
(66 pcs)
Add Ons
$7 - 5 Position Fuse Holder 1/4" quick disconnect
$4 - Rectifier Bridge
$8 - Big Blue - NOS made in 1999 (These are in good shape and I have them in all my games)
$29 - DLX Parts Kit - Everything in the hardware parts kit plus all add ons.
Fuse label is included for free for each panel.
I have enough part kits for 25 or so. If sold out, it may take a little extra time to get more parts. As soon as it get close to being sold out (if it does), I'll start ordering more so that there is no delay.
Paypal payments to [email protected] Be sure you put your KLOV name in the comments and what payment is for. Dont forget your contact info
1. Project (ie Power Brick panel, Parts kit - please specify )
2. KlOV Alias
3. Name & Shipping address
4. Email address
From the time I say go, expect 3-4 weeks. I am going to run enough for everyone who prepays before the deadline. I will update on a regular basis.
I'll give the pre-order until October 1st @ 6pm Central time. After the 1st, the panel will go up if* there are any left over. If there is not enough interest to get this done, I'll refund all monies. Judging by the interest list, this should be no problem.
Paid List
-------------------------
Joeb1355 x3 panels, x1 DLX , x1 HDW - SHIPPED
Chris25810 x1 panel - SHIPPED
Zud x2 panels, x2 DLX - SHIPPED
Bheineck x6 panels, x6 DLX- SHIPPED
Markh x2 panels , x2 DLX - Ready for Pick Up
MrBill08 x3 panels, x3 HDW - Picked Up
Kspiff x7 panels, x7 DLX minus big blue - SHIPPED
MNRocketry x2 - SHIPPED
Cloggans x8 , 4 HDW- SHIPPED
Joeycuda x4 panels - SHIPPED
Mycroft x4 panels, 4HDW- SHIPPED
Jimk x2 panels, 2HDW- SHIPPED
Arcadium x3 panels - SHIPPED
Raj x1 panel - SHIPPED
Tronic x6 panels, 4HDW - Picked Up
Docfrankie x2 panels , 2HDW - SHIPPED
Roadrunner000 x4 panels 4DLX - SHIPPED
Gregbl x5 panels, 5DLX - Ready for Pick Up - email sent -
Brokent0ken x5 panels, 5DLX minus big blue- SHIPPED
Mort x2 panels, 2DLX - SHIPPED
MXracer x1 panel, 1 DLX - Ready for Pick Up
Phetishboy x1panel, 1 DLX minus fuse hldr - SHIPPED
Dezbaz 1 , 1DLX - SHIPPED
Seawolf 6, 6DLX - Ready for Pick UP
-------------------------
Panels 84 / DLX 41 / HDW 20
Attachments
Last edited:


