bluestreak
Member
FS: Atari Hard Drivin' Cockpit Parts still available
Some parts still available, so PM with offers. Ready to move this stuff out of here but I can't give it away as I am trying to cover some costs on original purchase.
Here's a list of available part's but I may have left off some, so ask.
Complete shifter assy. w/knob and boot.(boot has small tear in it)
Main logic board stack without sound board. Worked fine when removed.
Steering console with steering moter,POT,etc. less abort sw, seat adj sw, and start switch.
Marque w/frame (marque brittle and does have one crack in it, but all there).
Seat
Lower seat assy w/seat lock coil, less 1 lower spring pin
Clutch, Brake, Gas pedal assemblies.
Main coin assy. enclosure but coin door and coin box sold.
Complete power supply assy.
Wiring harnesses.
2 original med resolution monitor boards, both need work. one of them has a cracked PCB, but I think it is repairable as it is on the edge.
Would consider trades for 12 inch monitor that goes into an Arachnid Super 6/Top Gun Challenge Dart Bd.
If you want shipping, it would be from area code 77386 so you can get an idea of shipping.
Local pickup welcome.
Some mechanical pieces sold but ask if you are looking for anything in particular let me know.
I have replaced brushes in the Feedback monitor for $25 last year so feedback was VERY stout on the steering motor.
No cabinet or large cabinet plastics
Some parts still available, so PM with offers. Ready to move this stuff out of here but I can't give it away as I am trying to cover some costs on original purchase.
Here's a list of available part's but I may have left off some, so ask.
Complete shifter assy. w/knob and boot.(boot has small tear in it)
Main logic board stack without sound board. Worked fine when removed.
Steering console with steering moter,POT,etc. less abort sw, seat adj sw, and start switch.
Marque w/frame (marque brittle and does have one crack in it, but all there).
Seat
Lower seat assy w/seat lock coil, less 1 lower spring pin
Clutch, Brake, Gas pedal assemblies.
Main coin assy. enclosure but coin door and coin box sold.
Complete power supply assy.
Wiring harnesses.
2 original med resolution monitor boards, both need work. one of them has a cracked PCB, but I think it is repairable as it is on the edge.
Would consider trades for 12 inch monitor that goes into an Arachnid Super 6/Top Gun Challenge Dart Bd.
If you want shipping, it would be from area code 77386 so you can get an idea of shipping.
Local pickup welcome.
Some mechanical pieces sold but ask if you are looking for anything in particular let me know.
I have replaced brushes in the Feedback monitor for $25 last year so feedback was VERY stout on the steering motor.
No cabinet or large cabinet plastics
Last edited: