FS: arcade leaf switches / brackets lot

cstup

New member
Joined
Oct 28, 2009
Messages
6
Reaction score
0
Location
Louisville, Kentucky
Rating - 0%
0   0   0
I've got a whole stock of new and used leaf switches with their thick and thin housings, plus some brackets that go with them.

There are approx:
5 of the brackets with the small hole
15 or more of the larger holed brackets
30+ of the switch assemblies, some new, some used (the switches have been soldered, but i'm not sure the switch was ever used), in both short and long depths.

I can get an exact count if someone is interested in the lot. Make me an offer.
 

Attachments

  • switchparts.jpg
    switchparts.jpg
    41.3 KB · Views: 53
Do you have dimensions of the bracket with the large hole? Looks similar to the PunchOut KO bracket that a few people here were looking for. 15 of them should easily cover everyone.
 
The hole is 1 and 3/16" in diameter. The overall height of the switch mount is just shy of 2".

I'd bet these are nintendo brackets... that sounds familiar.
 
Yeah, the other smaller ones looking like normal button Nintendo brackets, but I have seem them used on other games as well.
 
The brackets are for mounting microswitches on. I have seen them bastardized onto non-Nintendo CP's a couple of times. Always wondered where they came from.

ken
 
Back
Top Bottom