FS Agent X Control Panels & Speaker Panels

Takeman

Well-known member
Joined
Nov 7, 2005
Messages
6,066
Reaction score
1,194
Location
Illinois
Rating - 100%
231   0   0
I am going to be doing a run of Agent X Control panels and speaker panels for the upcoming kit that will be out this summer. This will work with the art Kit that Rich from TOG is producing. The control panel & speaker panels are for a dedicated Crystal Castles cabinet. I am planning on only running 25 of each. If youre on the art list, then you will need a panel (or have to get a crystal castles panel and do alot of welding) & a speaker panel (or rob one from a crystal castles). From what I understand, there are 3 different speaker panel overlays in the kit.

Now for the details.

Control Panels will be an introductory $65 each plus $18 shipping which includes a custom box. ($83 Shipped)


Speaker Panels will be an introductory $78 each plus $14 shipping. (perforated metal is very expensive and all the bends & blind rivet)
($92 shipped)

If purchasing both, I can combine shipping at $24 for both pieces. (total shipped is $167 for both pieces)


Paypal payments to [email protected] Be sure you put your KLOV name in the comments and what payment is for.

I will update on a regular basis.

I'll give the pre-sale until May 23rd @ 6pm Central time. After the 23rd, the panel will go to $80 plus $18 shipping & Speaker Panel will be $93 Plus $14 shipping


Any questions? Ask......

Will mark paid when payment is received.

List:
Chips4sle- both - PAID - PICKED UP
Seawolf - both - PAID - PICKED UP
G3n3r1c - panel only SHIPPED
Van - both - SHIPPED
AvidGeek - both - SHIPPED
Bubbleboy - both - pay by 05/23 ?????????
Rikitiki - both - SHIPPED
Roadrunner - speaker panel - SHIPPED
Ed Beeler via email - both - SHIPPED
Bwiklem - both- PAID - SHIPPED
Bdn103 - both- PAID - SHIPPED
Matt Sell - both - SHIPPED
Atariscott - both - PAID - SHIPPED
Hudsonarcade - both - pay by 05/23 ???????????
Shertz - both -PAID - SHIPPED


________________________
13 CP's / 13 speaker panels
 
Last edited:
Just wanted to thanks Troy for taking on this project. Anyone who remembers how much Francis had to pay to have a custom control panel made (couple hundred dollars) knows how great of a price this is to have something that will be done right and cpo ready.

Those on the Agent X art package list should jump on this now cause we won't be doing this again.
UPDATE: I EMAILED EVERYONE WHO IS CURRENTLY ON THE ART PACKAGE LIST THAT IS IN LINE TO GET A SET SO YOU HAVE NO EXCUSE IF YOU DON'T ORDER OR GET ONE.

Some of you that are not on list might want to also purchase these parts ...never know when extra art may come along or a few might sell there packages..who knows.

We will be offering all three speaker grill overlays (two of them were never produced or released by atari) so you will need three of the speaker grill panels if you want to have all three to display on your cab as you see fit since you can't take the overlay off once they are installed.

So your choice is hoping you luck out to find speaker grill assembly off of a trashed crystal castles cab or getting a minty brand new powder coated one..trust me you don't want to try to find one and then have to strip off old glue..I've done it and its pain in the ass.

The cpo is also pain..and you have to fill in holes and sand..and it never comes out as nice as a custom panel made for this overlay.

Rich assures me this art package will finally be wrapping up as we approach summer so those who have been patient I thank you..and hope to be shipping this stuff very soon..in mean time if you have new cabinet and want the hard to find parts this is your one and only chance to get the two hardest to find parts...thanks to Troy.
 
Last edited:
Takeman... just sent you PP for grill and panel.

Thanks for taking this project on. Can't wait to eventually get the artwork and finish this thing once and for all.
 
Im in Troy sending in my order as well :D
thanks so much for helping with these.
I sent a template to Troy for this which should match the cpos to a T
and like Troy stated there will be 3 versions of the speaker grill overlay
in the art package so your choice on that all orginal Atari design Revsions were run.
layoutversions.jpg


the package entire package is LONG OVERDUE I know and will be coming to a close this Summer MOST DEFINATLY.
Its been one of the longest on-going and largest projects Ive had to date.
9 reproductions pieces total in the art package along with a few new suprizes :)

I only have 2 pieces left to finished the SideArt and the Cloak&Dagger marquee which will be finshed this month. (you get both "C&D and Agent X" marquee versions.

DPwitz also just posted for a possible 2nd run of the marquee frames for those interrested.
colsgames024.jpg

http://forums.arcade-museum.com/showthread.php?t=182484

Ill be updating my original webpage over the next few weeks and will continue to post
all the finishing details on this project as it finally wraps up.
http://www.thisoldgame.com/Projects/AgentX.htm


A BIG thanks to Scott for diggin up the original films on this and to Roadrunner for kickstartin the project
and constantly kickin my butt to get er done :D
 
Last edited:
yeah thats really a question for Rick
we havnt taken any money on this project so his list was an interest list
so when its finally ready it will be first com first serve going down that list.
So heopefully hes gone through the list at this point and can confirm its current standing.
 
I sent an email out to everyone on the original art list that was in line to get a set. So far I have received confirmation from 17 people. That leaves around 4 people to still reply. I will give them a few more days and then I'm moving on to those on standby list. If I would get through that list then I will simply post on here as last chance offer for remaining set(s). I don't anticipate there being any left but even if there is one left from original list I will offer it up on here but you will have to purchase one control panel and speaker grill if it comes to that to help support Troys hard work on these.

Of course when it comes time to pay that could change everything..and some more sets could be available. However the people on this list have been very dedicated and patient so I really expect that most will come through when this is done..especially when they see how dam nice this art turned out and all the little extras that ended up getting done to compliment this art package.

It should also be noted that in the event that there are extras of the panels and speaker grills left over from this run(say more than just a few of each)...I will take remaining stock from Troy to make sure he is covered on his end for the expense of making these. You can be certain that they will be sold at an inflated rate if I have to front up that money..so don't hesitate to get one now cause I will not sell as cheap as Troys pre-sale or after sale price...his price is more than fair and really in my mind a steal for all the work that goes into making these. You have been warned.:D

Also Mark Spaeth contacted me and the Agent X jamma adapters that he custom made for this project are available and an absolute must if your making a cab. They allow you to use a jamma harness to wire your cab and run the board-set. Crystal Castles uses totally different pin-out and style harness so it can't be used unless you do some major hacking and rewiring. Mark's price was 75.00 for this adapter which includes the audio amp right on the adapter. I have purchased three and they work perfectly. So much easier to have this when customizing the cabinet.

Contact him at [email protected]
 
Last edited:
Also Mark Spaeth contacted me and the Agent X jamma adapters that he custom made for this project are available and an absolute must if your making a cab. They allow you to use a jamma harness to wire your cab and run the board-set. Crystal Castles uses totally different pin-out and style harness so it can't be used unless you do some major hacking and rewiring. Mark's price was 75.00 for this adapter which includes the audio amp right on the adapter. I have purchased three and they work perfectly. So much easier to have this when customizing the cabinet.

Contact him at [email protected]

I tried to but he told me to "go to hell and make my own fucking adapter" :D

I had this info posted on the Coin Op Space Agent X group.
But, when a couple of people paid and never recive them I took that info down. :(

Maybe Dokert could help with some wiring harnesses ??
 
Last edited:
I tried to but he told me to "go to hell and make my own fucking adapter" :D

I had this info posted on the Coin Op Space Agent X group.
But, when a couple of people paid and never recive them I took that info down. :(

Maybe Dokert could help with some wiring harnesses ??

Well I know Mark made them but not sure what the communication problem is there...perhaps I will just buy marks supply and sell them at the arts end. Problem Solved!
 
Bump!

I will updating the art list later today...for those on standby list I have a few openings..I will be contacting you in order of the list...and to those that replied I will post the list on here so we know who is in and who is not..just need to confirm a few more slots...

For those asking on final price Rich and I have to finalize all the costs etc to get a solid number but everyone will be given the total as soon as possible. I do know that this package will have to be shipped in two packages. One for all the flat pieces including the kickplate and the sideart separate in larger style tube. You can store it flat if your not installing it right away if you wish but for shipping purposes its not going to hurt to ship in tube and way too expensive to ship flat for this size. Everything else will be shipped flat.

More info to follow...
 
Last edited:
UPDATED AGENT X ART PACKAGE LIST AS OF JUNE 11, 2011.

IF THERE ARE CHANGES I WILL POST ANY MORE OPENINGS FOR ART SETS.

**IF YOUR ON LIST AND DON'T WANT TO BE YOU NEED TO CONTACT ME AT MY PERSONAL EMAIL @ [email protected] OR PM ME ON KLOV.

As stated we started with 25 sets to offer for sale. The first 5 art sets are reserved for those involved in the project from the very beginning(Scott Evans, Rich Lint, and me..:D) hence you will see the word RESERVED at those numbers.

If you were not sure if you were on the list even though I have gone through great pains to notify all of you..now you know. So if you want to get in on these parts please do so now.

Please keep my email handy if something about your contact info changes please send me an email. A few people originally on list didn't do that and were bumped off when I couldn't get in contact with them to update this list. I realize this has taken years so I tried to give them as much times as possible but I have to keep this list updated so you snooze you lose.:rolleyes:

Lets get those 25 panels and speaker grills sold and support the great work Troy's doing for all arcade collectors.

1. RESERVED
2. RESERVED
3. RESERVED
4. RESERVED
5. RESERVED
6. Oliver Moazzezi
7. Damon Claussen
8. Keith Sadauskas
9. Ed Beeler
10. Brian Jones
11. Jeff Warden
12. Rory Blake
13. Mark Spaeth
14. Chris Walker
15. Alan Warren
16. Jeremy Smith
17. Van Burnham
18. Troy Akey
19. Ted Hooper
20. Steve Hertz
21. Brian Nunamaker
22. Brian Wiklem
23. Matt Sell
24. David Shoemaker
25. Jeffrey Matthews
 
Last edited:
I am picking these up Friday 05/13/11 and will being shipping Monday. These are first come first serve. Some people are buying more than one of each to sit on, which will reduce the amount available quickly. I will not be running these again....
 
Back
Top Bottom