FS: After Burner Stand Up

supadave1

Member
Joined
May 5, 2009
Messages
965
Reaction score
5
Location
Peebles, Ohio
Rating - 100%
22   0   0
SOLD SOLD SOLD SOLD SOLD.. NOTHING TO SEE HERE, MOVE ALONG..

UPDATE: I FIXED THE MONITOR. I pulled the chassis and replaced a couple components that was causing the issue. No more sync issue.

Now that the monitor is working I have increased the price a bit on the machine. Now asking 200.00 to cover parts and labor. :)


Monitor (WG 4600) needs work as seen in the pictures. The picture is off centered and no matter of adjustments on the knobs will work. There was a glare on the pics from the sun behind me when I took the pics but the colors are really crisp and good. Shaker moter isn't working and I never even looked into the issue one bit. Other then that it coins up and plays fine. PCB works 100%. I tested the ram and so forth in the service menu and everything passed just fine. All the lights work and all the doors are there as well I just took them off to take pics. Cabinet has some dings, scratches and some missing bolts. coin door is a bit beat up. I've got too many projects and I really don't feel like messing with it.

Thanks

I may part it if there is enought interest in any of the parts as well.
 

Attachments

  • IMG_1226.jpg
    IMG_1226.jpg
    97.5 KB · Views: 64
  • IMG_1228.jpg
    IMG_1228.jpg
    95.9 KB · Views: 54
  • IMG_1230.jpg
    IMG_1230.jpg
    95.9 KB · Views: 42
  • IMG_1286.jpg
    IMG_1286.jpg
    77.8 KB · Views: 26
  • IMG_1292.jpg
    IMG_1292.jpg
    88.6 KB · Views: 25
Last edited:
It's not in terrible shape but it's not as good as the pics make it look either. The plastics are in good shape though.. I guess that's the most important. And a working board of course.
 
Last edited:
It's not in terrible shape but it's not as good as the pics make it look either. The plastics are in good shape though.. I guess that's the most important. And a working board of course.

Well there's an honest seller right there, +1 You have PM

EDIT: I see what you mean, I can see the scrapes and stuff.
 
Bump.. I fixed the monitor sync issue. The Shaker does not work but the rest works 100%. I checked and there seems to be a little pc board that controls the motor. It may be shot. Does anyone have a spare one?? There is a motor for sure inside. I'll hotwire it and test it tomorrow if I get time just to make sure it works. I'm thinking that the control board is shot, and there looks to be a transistor or bridge rectifier possibly wired inline after the transformer as well. It may be the reason as well. I'll check things a little bit closer tomorrow night if I get the time.
 
Back
Top Bottom