kencinder
New member
I'm cleaning house and some stuff has to go.
I've decided I don't want to dedicate a Vert cab to my Aerofighters board and I can't stand micro-switches (That click is like nails on a chalkboard to me!).
Aerofighters PCB + Translite Marquee
Original Videosystem board NOT a clone. Works perfectly.
The marquee is in pretty good shape, some tape/tape marks along the edges but otherwise no bends/scratches.
Isn't minty, but once behind a retainer you shouldn't see any of the edge abuse.
$40
Micro-switch Buttons SOLD!
All essentially new, I have used a few of them for testing out in a panel but most have never been used.
They are Yenox buttons/switches.
6 Black with switches + nuts
2 black no switches + 2 extra nuts
4 white with switches + nuts
4 red with switches + nuts
$12 for all buttons
Micro-switch Competition Joysticks SOLD!
Pretty much new, never wound up using other than in a test panel.
These are X-Arcade brand sticks, 4/8 way supposedly (Just pop the E clip flip the insert in the bottom).
These have a lifetime Warranty from the manufacturer.
$18 for all 4
4 Wico Leaf Stick balltop Shafts - TMNT colors SOLD!
Used pull from my TMNT, in fairly good shape with E clips, springs and square plastic actuators (Better than those round ones IMO!).
They just need polished up. I replaced with NOS sticks.
$6 for all 4
~~~~~
I also have an LS Brand metal base balltop stick. GONE!
It appears to be complete save for the switch section missing.
Spring, actuator etc is all there. FREE with the purchase of any of the above items.
All prices are + shipping. Local pickup preferred.
I've decided I don't want to dedicate a Vert cab to my Aerofighters board and I can't stand micro-switches (That click is like nails on a chalkboard to me!).
Aerofighters PCB + Translite Marquee
Original Videosystem board NOT a clone. Works perfectly.
The marquee is in pretty good shape, some tape/tape marks along the edges but otherwise no bends/scratches.
Isn't minty, but once behind a retainer you shouldn't see any of the edge abuse.
$40
Micro-switch Buttons SOLD!
All essentially new, I have used a few of them for testing out in a panel but most have never been used.
They are Yenox buttons/switches.
6 Black with switches + nuts
2 black no switches + 2 extra nuts
4 white with switches + nuts
4 red with switches + nuts
$12 for all buttons
Micro-switch Competition Joysticks SOLD!
Pretty much new, never wound up using other than in a test panel.
These are X-Arcade brand sticks, 4/8 way supposedly (Just pop the E clip flip the insert in the bottom).
These have a lifetime Warranty from the manufacturer.
$18 for all 4
4 Wico Leaf Stick balltop Shafts - TMNT colors SOLD!
Used pull from my TMNT, in fairly good shape with E clips, springs and square plastic actuators (Better than those round ones IMO!).
They just need polished up. I replaced with NOS sticks.
$6 for all 4
~~~~~
I also have an LS Brand metal base balltop stick. GONE!
It appears to be complete save for the switch section missing.
Spring, actuator etc is all there. FREE with the purchase of any of the above items.
All prices are + shipping. Local pickup preferred.
Last edited:
