FS - add on harness for arkanoid spinner - $20 shipped

ElfShotTheFood

New member
Joined
Aug 17, 2007
Messages
3,693
Reaction score
39
Location
point pleasant, New Jersey
Rating - 100%
12   0   0
FS - add on harness for arkanoid spinner - $20 shipped

this will let you easily add a spinner to your jamma harness or taito/jamma adapter.
attachment.php


not the most complicated thing ever made.

1; connect the 4 pin plug to the spinner's optic board.

2; connect the small red and yellow wires with the .187 male connectors to the joysticks left and right wire's female connectors.

3; the thick red and black wires, with the spade connectors, should be long enough to reach a switcher anywhere in the cab.

4; play arkanoid or other spinner game.


in theory, I can also make a trackball harness. let me know if your interested, and I'll find my trackball. and make some up. $25 shipped
 

Attachments

  • suc53961.jpg
    suc53961.jpg
    97 KB · Views: 77
I don't have a 60 in-1 doesn't the 60-in-1 have a dedicated input for the trackball?

I can probably make a harness for that if I find out what plug it uses and the pinout,

I think so. What would your harness be best suited for? Just throwing an Ark conversion into a jamma rig?
 
when I sold my arkanoid pcb, spinner, and jamma adapter, I made one of these to go with it.

it could be used with a taito classic harness also, if you wanted to play arkanoid in your qix/alpine ski/vertical taito game cab.


basically I have a small amount of .187 male quick connectors, and no other use for them. so I'll offer up reasonably priced harnesses for those who don't want to make their own. :D
 
Back
Top Bottom