FS: 19" Monitors, Raster, Vector, etc. (Schwenksville, PA)

QuartrArcade

Active member

Donor 2011
Joined
Dec 16, 2005
Messages
1,110
Reaction score
15
Location
Pennsylvania
Rating - 100%
89   0   0
FS: 19" Monitors, Raster, Vector, etc. (Schwenksville, PA)

Have another decent size pile of monitors building up that I'd like to thin down. Basically a mix of stuff, including some WG4900s, G07s, Sanyos, etc. Here is some pricing:

19" Raster Monitors (mostly G07s and Sanyos) - $40-$60, the more burn-in, the cheaper the monitor. I think non-Sanyos all have some burn-in, some better than others. These are for working, but not rebuilt monitors. Some will need cap kits. Most of these have some burn-in.

19" Rebuilt Sanyos - $100-130 each. I have a couple of these, recapped, tested and working fine. Again price depends on burn-in.

19" B&W Vectors - $80-100 each. Price depends on burn-in again. Probably have some missing parts for cheaper. These are untested, but most are pulled from games, probably should be easy rebuilds.

19" WG6100 Color Vectors - $150 each for most. I might have one or two with minimal burn for a little more. These are complete monitors, probably not working that will need to be rebuilt.

19" Sega Color Vectors - $200 each, Again these are complete, untested monitors in good condition. Might have one two for a little less.

Local pickup only, cash and carry. Monitors are located in Schwenksville, PA 19473. PM if you're interested and want to come by and take a look. I'll try to make you a deal if you want more than one.

I can test any raster monitor so you can decide when you stop by.

Thanks,
Anthony
 
I think all of the 6100s are spoken for at this point as well as a few Rasters. I'll try to get a better count of stuff in a day or so as some of it is not at this location.

I will ship the vector monitors without the tubes but everything else if anybody is interested. Just don't have the means to pack tubes properly anymore.

Anthony
 
Back
Top Bottom