Frontline Spinner Controler Problem...

local413

New member

Donor 2011
Joined
Sep 21, 2008
Messages
3,441
Reaction score
34
Location
Longmeadow, Massachusetts
I'm at my wits end with this controller.. I dissembled it to clean and refurb it awhile back.. Got it all back together and it works well.. My issue is the wiring.. I can't get the gun to move correctly.. It will go up and down, up right, up left,.. but not right or left or if i change the connections it won't go in one full direction.. I spent hours trying to wire it up in different combination's last night and i'm not getting anywhere..

It's always missing one full movement.. depending on how I wire up the controller.. I've tried other controllers, other pcbs, and so on. All voltages are correct.. I even took pictures of the wiring before i took it apart...

I'm so frikin close! The game is almost 100%, once i get the controller working.. Could a few people send me photos of how their spinner is wired up? Anything could help at this point.. I've worn out the wiring schematic..


Thanks
 
Here's mine

IMG_5910.jpg


IMG_5913.jpg
 
Awesome!

Thanks for taking the time and photographing the CP for me!
I think I can make out each wire.. I'll try it tonight and report back.
 
humm...

It's not the wiring.. as I've got it set up just like yours.. It must be the switches.. Going to replace each one.. This spinner is going to kill me.
 
Back
Top Bottom