amsvette
Member
I have a Sega cabinet that was converted to Gunsmoke. I believe it was originally an Astro Blasters. My plans are to move Gunsmoke into a different cabinet and turn the Sega cabinet into Frogger. I have been slowly gathering parts to do the conversion. I have a working 36 pin PCB, a nice original marquee, original joystick/buttons/control panel harness, and I just picked up a power supply and 36 pin harness. The power supply and harness supposedly came out of a working cabinet. They are both in great shape, and were the last pieces of the puzzle. I decided to grab all my parts last night and lay everything out. It appears I have some extra plugs on the power supply I'm not sure what to do with. I also noticed my control panel harness plug and what I assume is the corresponding plug on the main harness don't match. The main harness is a red 9 pin plug with 7 wires. The control panel harness has a 12 pin plug but has only 7 wires. The manual shows a different power supply than what I have.
Extra plugs:
2 pin yellow plug (2 wires)-?
3 pin yellow plug (2 wires)-?
9 pin dark red plug (7 wires)- control panel?
2 pin red plug (2 wires)-?
2 pin dark red plug (2 wires)-?
6 pin white plug (5 wires)-?
Can anybody confirm what the extra plugs do, or point me to a revised wiring diagram?
I'm including pictures of He power supply, harness, and PCB since I know there are variations of each.
Thanks in advance!
Extra plugs:
2 pin yellow plug (2 wires)-?
3 pin yellow plug (2 wires)-?
9 pin dark red plug (7 wires)- control panel?
2 pin red plug (2 wires)-?
2 pin dark red plug (2 wires)-?
6 pin white plug (5 wires)-?
Can anybody confirm what the extra plugs do, or point me to a revised wiring diagram?
I'm including pictures of He power supply, harness, and PCB since I know there are variations of each.
Thanks in advance!