katuuuz
New member
Anyone with a Frogger machine that can lend some knowledge...
I picked up an upright Frogger today which I would say is 7/10 condition-wise. Unoriginal CPO, and a few scuffs. I want to tackle the coin door first. Everything works mechanically speaking, only both trip switches' wires are broken off at the joint. I was wondering if anyone can let me know if these ones from Happ will work... http://happ.com/accessories/42010500.htm. They also have another style, but I chose this one because the original switches have the three prongs coming out of the bottom and the other style offered has the two on the bottom, and one on the side.
Along with that, is there anywhere I can buy this wood finished laminate or something close to it? I'd like to re-face the cabinet and she should be in the 9/10 zone. My coin door is scratched to hell, and if I buff it out I'll lose the un-painted 25c arrow.
I picked up an upright Frogger today which I would say is 7/10 condition-wise. Unoriginal CPO, and a few scuffs. I want to tackle the coin door first. Everything works mechanically speaking, only both trip switches' wires are broken off at the joint. I was wondering if anyone can let me know if these ones from Happ will work... http://happ.com/accessories/42010500.htm. They also have another style, but I chose this one because the original switches have the three prongs coming out of the bottom and the other style offered has the two on the bottom, and one on the side.
Along with that, is there anywhere I can buy this wood finished laminate or something close to it? I'd like to re-face the cabinet and she should be in the 9/10 zone. My coin door is scratched to hell, and if I buff it out I'll lose the un-painted 25c arrow.
