Free UGLY Mame Cab in SW Michigan

TheMonarch4

Member
Joined
Oct 15, 2010
Messages
539
Reaction score
14
Location
Benton Harbor, Michigan
Rating - 100%
7   0   0
A very ugly mame cab up for free or soon it out with the trash. This was part of a large lot of cabs I picked up. It was a NBA Jam. No joystick, no buttons and no coin door. It has a ugly large wooden fabricated control panel. Someone put in a large 25 inch (i think 25 not sure) TV not CGA and not VGA. It is a TV that actually works good.

FREE Ugly Mame Cab and you know you want it.

Located in Benton Harbor, MI 49022
 

Attachments

  • ug 1.jpg
    ug 1.jpg
    87 KB · Views: 193
hehe "you know you want it" if my dog keels over anytime soon, the CP will make a great coffin!
 
Did I mention the cab was ugly. The only reason I even brought it home was to take the controls and the coin door. Imagine how nice it could be to be able to say that my cab is more ugly then yours. I know I should just throw the hole thing out but just thought I should offer it up first.
 
I am probably the biggest pack rat in SW MI when it comes to arcade parts/games, but even I will pass on the abomination!
Aaron
 
one sheet of partical board screwed right to the base halfway up on both sides.
wraped in tmold, it would look like it was ment to be there.
give it back that marquee section.
rip that control panal down to half the height and level it out.
it really wouldn't take much to fix it.
i wish i was closer, i'd save it.
 
one sheet of partical board screwed right to the base halfway up on both sides.
wraped in tmold, it would look like it was ment to be there.
give it back that marquee section.
rip that control panal down to half the height and level it out.
it really wouldn't take much to fix it.
i wish i was closer, i'd save it.

I wouldn't blame you. Some places games can be very, Very scarce. Most of you guys should consider yourself lucky to be in such a place.
 
i was looking on australias ebay earlier today, there were 20 bidders on cabinets not far off this one.
maybe a post on byoac might peak someones interest.
 
Last edited:
one sheet of partical board screwed right to the base halfway up on both sides.
wraped in tmold, it would look like it was ment to be there.
give it back that marquee section.
rip that control panal down to half the height and level it out.
it really wouldn't take much to fix it.
i wish i was closer, i'd save it.

Agreed, If someone was good at wood work it could be brought back to a decent cab. I know TheMonarch4 and am just busting his chops;.)
Aaron
 
Back
Top Bottom