Free Friday

whammoed

Well-known member

Donor 2024
Joined
Oct 31, 2007
Messages
1,366
Reaction score
83
Location
Florida
Rating - 100%
11   0   0
Found one more of these:
Pole Position gas pedal grip cover. This is made of high quality grip not like the crap you may find at the hardware store. Adhesive backed of course.
Qualifications:
1. Have a Pole Position that needs it
2. Be first to reply to this thread saying you want it

attachment.php
 
My PP could use it.

But, since she's not running yet because of board issues... I'd rather someone get it that can PLAY on it.
 
My PP could use it.

But, since she's not running yet because of board issues... I'd rather someone get it that can PLAY on it.


OK. If no-one else wants it, it's yours.

Anyone?
 
I could use it but I wasn't first. I'll absolutely take it if no one else wants it

If your PP is up and running, and you want it to replace the one that's on the pedal now, I'm all for you getting it. My PP cabinet is a paperweight until I figure out the board issues.
 
I lucked out and all my PP needs is monitor work. (Or in other words, a whole monitor really). I call 4ths :D
 
I could use it but I wasn't first. I'll absolutely take it if no one else wants it


Sounds like its yours. Please pm your address and I'll get it out to you.

Thanks to Scucci for being generous. PM me when you get yours running and I'll look around to see if there are any others I missed.
 
Sounds like its yours. Please pm your address and I'll get it out to you.

Thanks to Scucci for being generous. PM me when you get yours running and I'll look around to see if there are any others I missed.

Considering I found my powersupplies were sending out >7V on the 5V line... I smoked, I know, a resistor and a zener... hopefully those were the only things that took the hit. (hopefully that's what they were intended to do in the first place?) I've got 3 board sets here and all of them are fried in the same place it seems (from 3 different cabinets)... Maybe I'll get one up and going in a few weeks when I feel like looking at those POS boards again. lol
 
Considering I found my powersupplies were sending out >7V on the 5V line... I smoked, I know, a resistor and a zener... hopefully those were the only things that took the hit. (hopefully that's what they were intended to do in the first place?) I've got 3 board sets here and all of them are fried in the same place it seems (from 3 different cabinets)... Maybe I'll get one up and going in a few weeks when I feel like looking at those POS boards again. lol


Fortunately mine was mostly working when I got it. Once I cleaned up the power and wiring, the slight graphics glitch I had went away. Other than that it just needed a new pot on the pedal and the optics cleaned for the steering and it's been good. -knocks on wood-
 
Fortunately mine was mostly working when I got it. Once I cleaned up the power and wiring, the slight graphics glitch I had went away. Other than that it just needed a new pot on the pedal and the optics cleaned for the steering and it's been good. -knocks on wood-

Yeah, I guess I should be happy that at least the steering and pedal work 100%. I was able to play it for about 10 mins before the PS spiked on me (aka "find the burning component smell")
 
Back
Top Bottom